Purchase HP : HPE6-A46 Exam Materials and then pass exam easily

HP HPE6-A46 Exam Overview:

HP HPE6-A46 Exam Syllabus Topics:

HP Delta-Aruba Certified Switching Professional Sample Questions:

1. Refer to the exhibit.

Every switch shown in the exhibit is an AOS-Switch that runs PIM-SM. A network administrator wants to load-balance the RP role, so Switch-3 and Switch-4 both act as RPs for some of the multicast groups. How should the administrator configure the RPs?

A) Specify 10.3.3.3 as a static RP address on Switch-1. Specify 10.4.4.4 as a static RP address on Switch-2.
B) Specify the candidate RP command on Switch-3. Also specify the candidate RP command on Switch-4.
C) Specify Switch-3 and Switch-4 IP addresses as candidate RP addresses on Switch-1. Specify the same candidate addresses on Switch-2.
D) Specify 10.3.3.3 as a static RP address on half of the AOS-Switches and 10.4.4.4 as a static RP address on the other half.

2. Refer to the exhibits.
Exhibit 1

Exhibit 2

Exhibit 1 shows a portion of the BGP routing table when the BGP solution was first deployed. Exhibit 2 shows the same portion at the current time. What can explain the current state?

A) Due to changes at ISP 1, Switch-1 now selects a different best route.
B) Switch-1 can no longer reach ISP 1 at 192.168.1.1.
C) An administrator has applied a route map on Switch-1 that filters advertised routes.
D) Due to changes in the private network, Switch-1 can no longer reach 192.168.2.1.

3. A company starts to have issues with too many rules in the dynamic ACLs applied to AOS-Switch ports.
Administrators decide to remove some of the common rules from the dynamic ACLs and enforce them in an ACL applied to the users' VLAN instead.
What is one rule that administrators should keep in mind to ensure that the new ACLs control traffic as they expect?

A) Administrators should add an explicit deny at the end of the dynamic ACLs, so traffic will hit VLAN ACL.
B) If a port supports multiple clients, every dynamic ACL applied to one client filters traffic for all clients.
C) ACLs applied to VLANs cannot control ICMP traffic, do the dynamic ACLs must include the ICMP rules.
D) Traffic must be permitted by both the dynamic ACL and the VLAN ACL in order to be permitted.

4. Refer to the exhibits.
Exhibit 1

Exhibit 2

A company does not require authentication for security, but AOS-Switches are set up to use local MAC authentication (LMA) to assign the correct VLAN and priority to IP phones. IP phones and computers belong to different VLANs. Each device is supposed to connect to a specific port, but sometimes users connect their devices to the wrong ports and cannot receive access without help from IT.
How can a network administrator configure the switches to eliminate this issue?

A) Create a user role that applies the user VLAN, and set this role as the initial role.
B) Add the MAC addresses for computers to the myPhones MAC group.
C) Apply LMA to all edge switch ports, and set the unauth VLAN to the user VLAN.
D) Set the address limit to 2 on the switch ports that apply LMA.

5. A network administrator sets up MAC-Auth and captive portal to Aruba ClearPass on AOS-Switches. The solution seems to work for most guests. However, some guests open their browsers and are not redirected to the captive portal.
How should the administrator address the likely cause of the issue?

A) Reconfigure the captive portal URL hash key on some of the switches, which likely have the wrong password.
B) Set the RADIUS server time window to 0 because some guest computers likely have the incorrect system time.
C) Replace expired certificates on the switches and set their usage to captive portal since some guests have an HTTPS homepage.
D) Replace MAC-Auth on switch ports with Web-Auth because this authentication method offers more reliability with captive portal.

Solutions: