Purchase Cisco : 300-710日本語 Exam Materials and then pass exam easily

Topics of Securing Networks with Cisco Firepower (300-710 SNCF) Exam

These core topics isted below are general recommendations for the material that is likely to be used for the examination. However, on any particular delivery of the test, other similar topics could also appear. The guidelines below can update at any time without notice to better represent the contents of the exam and for clarity purposes.

It is recommended that, where possible, the applicant use these courses and/or other resources to provide background information on the exam objectives. The syllabus for the Securing Networks with Cisco Firepower (300-710 SNCF) examination is listed below in detail of each section and their topics:

1. Deployment (30%)

Objectives covered by this section:

Objective 1.1 - Implement NGFW modes:

• Routed mode
• Transparent mode

Objective 1.2 - Implement NGIPS modes:

• Inline
• Passive

Objective 1.3 - Implement high availability options:

• Active/standby failover
• Multi-instance
• Link redundancy

Objective 1.4 - Describe IRB configurations

2. Configuration (30%)

Objectives covered by this section:

Objective 2.1 - Configure system settings in Cisco Firepower Management Center

Objective 2.2 - Configure these policies in Cisco Firepower Management Center:

• DNS
• Intrusion
• SSL
• Prefilter
• Identity
• Malware and file
• Access control

Objective 2.3 - Configure these features using Cisco Firepower Management Center:

• Application detectors (Open AppID)
• Correlation
• Network discovery
• Actions

Objective 2.4 - Configure objects using Firepower Management Center:

• Intrusion Rules
• Object Management

Objective 2.5 - Configure devices using Firepower Management Center:

• Platform Settings
• Device Management
• QoS
• NAT
• VPN
• Certificates

3. Management and Troubleshooting (25%)

Objectives covered by this section:

• Objective 3.1 - Troubleshoot with FMC CLI and GUI

• Objective 3.2 - Configure dashboards and reporting in FMC

• Objective 3.3 - Troubleshoot using packet capture procedures

• Objective 3.4 - Analyze risk and standard reports

4. Integration (15%)

Objectives covered by this section:

• Objective 4.1 - Configure Cisco AMP for Networks in Firepower Management Center

• Objective 4.3 - Implement Threat Intelligence Director for third-party security intelligence feeds

• Objective 4.2 - Configure Cisco AMP for Endpoints in Firepower Management Center

• Objective 4.4 - Describe using Cisco Threat Response for security investigations

• Objective 4.6 - Describe Rapid Threat Containment (RTC) functionality within Firepower Management Center

• Objective 4.5 - Describe Cisco FMC PxGrid Integration with Cisco Identify Services Engine (ISE)

Reference: https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/sncf-300-710.html

Exam Content

The content of the Cisco 300-710 test revolves around four domains, each containing specific knowledge and skills that the candidates must develop competency in. These areas have different percentage weights in the exam syllabus, which shows how many questions related to this or that topic will appear in the test. While preparing for your certification exam, you need to pay special attention to the sections with higher weight. However, you need to remember that only mastering all the topics will guarantee success in your test. The detailed outline of the domains covered in Cisco 300-710 is provided below.

• Deployment – 30%

Within this first topic, the examinees need to demonstrate that they have the relevant skills in implementing NGFW modes (including routed mode as well as transparent mode); implementing NGIPS modes (including passive & inline); implementing high availability options (including link redundancy, standby/active failover, multi-instance); describing IRB configurations.

• Configuration – 30%

This domain requires that the students have the expertise in a wide range of knowledge areas. For starters, they should have proficiency in configuring system settings within Cisco Firepower Management Center as well as configuring the policies, such as access control, malware & file, intrusion, identity, SSL, DNS, prefilter within Cisco Firepower Management Center. In addition, they need to able to customize the following features with the help of Cisco Firepower Management Center: network discovery, correlation, application detectors (Open AppID), and actions. This part also encompasses such skills as customizing objects with the help of Firepower Management Center (including object management as well as intrusion rules) and customizing devices with the help of Firepower Management Center (including device Management, VPN, NAT, QoS, Certificates, Platform Settings).

• Management & Troubleshooting – 25%

To tackle the questions associated with this subject area, the test takers should develop their competency in performing troubleshooting with the help of FMC CLI as well as GUI; customizing dashboards as well as reporting in FMC; troubleshooting with the help of packet capture actions; analyzing standard reports and risk.

• Integration – 15%

The last section in the Cisco 300-710 exam encompasses the individuals’ skills, such as customizing Cisco AMP for Networks within Firepower Management Center; configuring Cisco AMP for Endpoints within Firepower Management Center; implementing Threat Intelligence Director for third-party security intelligence feeds. Moreover, the learners should possess the expertise in describing the utilization of Cisco Threat Response for the needs of security investigations; describing Cisco FMC PxGrid Integration using Cisco Identify Services Engine (ISE); describing the functionality of Rapid Threat Containment (RTC) within Firepower Management Center.

Cisco 300-710日本語 Exam Overview:

Facts for 300-710 SNCF Test

Exam 300-710 assesses how well candidates understand the Cisco Firepower and Firepower Threat Defense types of software, including aspects such as the management, integration, implementation, troubleshooting, and adjustment of these software types and their policies. Exam 300-710 is of 90-minute duration and candidates can expect to find drag and drop, fill in the blank, and simulation types of questions in the actual test. What's more, such a test is available anywhere in the world in two languages, English & Japanese. Then, to sit for this 300-710 SNCF validation, candidates must register through Pearson VUE and will be allowed to take the official exam at local testing centers or online under proctored conditions. To help students fully prepare for 300-710, the vendor provides two official training courses, which are ‘Securing Networks by using Cisco Firepower Next-Generation IPS (SSFIPS)' and ‘Securing Networks with Cisco Firepower Next Generation Firewall (SSNGFW)'.

Cisco 300-710日本語 Exam Syllabus Topics: