100% Real & Accurate H31-341 Questions and Answers with Free and Fast Updates
Get Unlimited Access to H31-341 Certification Exam Cert Guide
Get to know about the Importance of Huawei H31-341 Certification
The Huawei H31-341 certification has been designed to assess your skills related to the Huawei HiLTE. You will be required to take up comprehensive knowledge about the Huawei HiLTE and understand its features and designs. If you successfully clear this exam, it will help you to get a good career in IT. H31-341 Dumps is an amazing product that helps you prepare for this exam, we will suggest you take a look at our product before taking up the actual exam so that you can get the best results. This certification will not only give you a good reputation but will also give you an opportunity to work with top IT companies. The Huawei HiLTE certification will also help you to get an interview with these companies. Once you work with them, you will face a good future. Huawei H31-341 certification will also help you to get a perfect job, but you need to prepare well for the exam. When it comes to exam preparation, experts always recommend that you take up practice questions. This will not only help you understand the queries that may come up in the actual Huawei H31-341 exam but will also let you know about the difficulty level of the exam. Once you are aware of this, it will be much easier for you to prepare for it.
What is the exam cost of Huawei H31-341 Certification
The Huawei H31-341 certification exam cost is $200 per candidate.
Certification Topics of Huawei H31-341 Exam
The following are the topics that may come up in the Huawei H31-341 exam:
- Basic knowledge - 50%
- Multiple choice questions - 40%
- Aware of professional knowledge - 10%
NEW QUESTION 120
Two PIU/APIU boards use the hot backup mode to supply power to the system on the OSN 1800 device, when a PIU/APIU board fails, the system can still work normally.
- A. TRUE
- B. FALSE
Answer: A
NEW QUESTION 121
Which of the following statements about AU pointers are correct?
- A. AU-PTR indicates the position of the JO byte.
- B. The value of the AU-PTR pointer is placed in the last 10 bits of the HI and H2 bytes. Therefore, the valid value of the AU-PTR pointer is 0-1023.
- C. The root cause of the AU pointer justification is that the clocks of the upstream and downstream stations are not synchronized.
- D. If the receive end detects that the H1H2 bytes are "1", the local end generates the AU-AIS alarm.
Answer: B
NEW QUESTION 122
The transmission windows of 1310 nm and 1550 nm are low loss windows. In DWDM systems, only the 1550nm transmission window is used. Which of the following is the main reason?
- A. The nonlinear effect in the 1550nm wavelength region is very small.
- B. None of the above
- C. The 1550 nm wavelength region is suitable for long-distance transmission.
- D. The operating wavelength flatness area of EDFA is contained in this window.
Answer: D
NEW QUESTION 123
Which of the following statements about the line fiber quality monitoring performance parameters is wrong?
- A. The pulse width of emitted optical pulses varies according to monitoring modes, and affects the detection distance and measurement precision. A greater pulse width provides a larger dynamic range, longer detection distance and better measurement precision.
- B. When the pulse width increases, the light emitting time increases and consequently a larger energy is obtained. This means that a larger dynamic range can be acquired but also larger dead zones will result.
- C. Measurement is performed multiple times within the detection time. The average value is obtained based on the measurement results to improve the measurement precision. The actual duration from the time when a detection event starts to the time when the detection results are returned will be longer than the Detection time.
- D. The total fiber loss will affect the detection distance and the dynamic range is fixed for the same detection mode. Therefore, a larger total fiber loss indicates a smaller detection distance.
Answer: D
NEW QUESTION 124
When the input optical power of the amplifier at the receiving end OAU is lower than the nominal optical power, which of the following are wrong in the operation?
- A. Set the OAU gain so that its output reaches the nominal value
- B. Improve the sending optical power of the originator
- C. Adjust the dimmable fading before the terminating amplifier to increase the input optical power of the amplifier
- D. When the input optical power cannot be increased by adjusting the adjustable attenuator, the adjustable attenuation at the input of the amplifier is removed.
Answer: B
NEW QUESTION 125
What are the basic principles of MSTP device fault location? (Multiple choice)
- A. Advanced first, then low level
- B. External first, then transfer
- C. Low speed first, then high speed
- D. Network first, then network element
Answer: A,B,D
NEW QUESTION 126
Which of the following description of the PWE3 technology are correct? (Multiple choice)
- A. The internal data services carried by PWE3 are visible to the core network.
- B. PWE3 technology belongs to the second layer VLL solution
- C. PRE3 technology provides ATM, Ethernet, and TDM services with end-to-end virtual link emulation at the PS network boundary.
- D. For PE3 emulation of Ethernet services, PW control words can be manually configured on the PE.
Answer: B,C,D
NEW QUESTION 127
Which of the following is not a part of the ASON Control Protocol?
- A. RSVP-TE
- B. IS-IS
- C. LMP
- D. OSPF-TE
Answer: B
NEW QUESTION 128
Daily equipment maintenance items, excluding:
- A. Check the cabinet and board indicators
- B. Check the room temperature, humidity and cleanliness
- C. Check the fan box and clean the air filter
- D. Check device sound alarms
Answer: C
NEW QUESTION 129
Before querying the error and optical power on the network management, you need to perform the () operation. Otherwise, you cannot query the corresponding teaching data.
- A. Configuration data
- B. Create a logical fiber
- C. Synchronizing network metadata
- D. Turn on NE performance monitoring time.
Answer: D
NEW QUESTION 130
After the PWE3 service is successfully deployed, what is the deployment status of the PWE3 service displayed?
- A. Deployment
- B. Activated
- C. Activation
- D. Deployed
Answer: D
NEW QUESTION 131
The following description of the use of synchronous methods to create fiber optics, which is wrong?
- A. If there is a fiber that is not created on the U2000 or a fiber that is not created on the network element, you need to synchronize or create it.
- B. The existence of a conflicting fiber does not affect the configuration of the path, so it can be ignored.
- C. Collision fiber refers to the fiber that is configured on the network element side and is inconsistent with the configuration on the network management side.
- D. The fiber exists on the network management side and the network element side, and the fiber with the same information is not required to be created.
Answer: B
NEW QUESTION 132
After the signal of the standard Ethernet frame length of 64 Bytes is connected to the Ethernet board, if the QinQ function is enabled, what is the actual frame length of the signal inside the board?
- A. 64 Bytes
- B. 84 Bytes
- C. 68 Bytes
- D. 80 Bytes
Answer: C
NEW QUESTION 133
Which of the following alarms trigger optical line protection switching?
- A. R_LOS
- B. R_LOF
- C. POWER_DIFF_OVER
- D. MUT_LOS
Answer: A
NEW QUESTION 134
The network element automatically backs up the network element database to the FLASH database every 30 minutes by default.
- A. TRUE
- B. FALSE
Answer: A
NEW QUESTION 135
What are the classification of Ethernet performance tests? (Multiple choice)
- A. Custom test
- B. Network performance test
- C. Network equipment performance verification test
Answer: A,B,C
NEW QUESTION 136
......
Reliable Study Materials for H31-341 Exam Success For Sure: https://www.pass4surequiz.com/H31-341-exam-quiz.html
100% Latest Most updated H31-341 Questions and Answers: https://drive.google.com/open?id=1FHzL3L1qNDFKiTfyhXpED9KRszsBm0SN