[2021] N10-007 Actual Exam Dumps, N10-007 Practice Test
Pass4SureQuiz N10-007 dumps & CompTIA Network+ sure practice dumps
CompTIA Network+ Exam Certification Details:
| Schedule Exam | Pearson VUE |
| Passing Score | 720 / 900 |
| Number of Questions | 90 |
| Duration | 90 mins |
| Sample Questions | CompTIA Network+ Sample Questions |
| Exam Name | CompTIA Certified Network+ Professional |
| Exam Price | $338 (USD) |
| Exam Code | N10-007 |
NEW QUESTION 279
Which of the following BEST describes the difference between layer 2 switching and layer 2 routing?
- A. Switching moves packets between hosts on different subnets, and routing moves packets between hosts on the same subnet.
- B. Routing moves packets between hosts on different subnets, and switching moves packets between hosts on the same subnet.
- C. Both routing and switching move packets between hosts on the same subnet, but routing does so at a faster pace.
- D. Both routing and switching move packets between hosts on different subnets, but switching does so at a faster pace.
Answer: B
NEW QUESTION 280
Which of the following access controls enforces permissions based on data labeling at specific levels?
- A. Separation of duties access control
- B. Role based access control
- C. Mandatory access control
- D. Discretionary access control
Answer: C
NEW QUESTION 281
Which of the following MUST be implemented to share metrics between routing protocols within the same
router?
- A. Routing table
- B. Route redistribution
- C. Dynamic routes
- D. Routing loop
Answer: A
NEW QUESTION 282
A network technician receives a call from a branch office about a problem with its wireless connectivity. The user states the office hosting a large meeting that includes some online training with local businesses. The guest users have all brought devices to connect to the guest network at the branch office. All users are connected to a single WAP and are reporting that connections dropping and network speeds are unusable.
Which of the following is the MOST likely cause of this issue?
- A. Interference
- B. DCHP exhaustion
- C. Chanel overlapping
- D. Overcapacity
Answer: A
NEW QUESTION 283
A technician is connecting a PC to a switchport. At the wiring closet, the technician is unable to identify which cable goes from patch panel A connected to the switch to patch panel B connected to the PC. Which of the following tools should the technician use to resolve the issue?
- A. Tone generator
- B. Multimeter
- C. Cable tester
- D. OTDR
Answer: A
NEW QUESTION 284
After a server outage, a technician discovers that a physically damaged fiber cable appears to be the problem.
After replacing the cable, the server will still not connect to the network. Upon inspecting the cable at the server end, the technician discovers light can be seen through one of the two fiber strands. Which of the following should the technician do FIRST to reconnect the server to the network?
- A. Replace the server's single-mode fiber cable with multimode fiber
- B. Move the fiber cable to different port on the switch where both strands function
- C. Reverse the fiber strands of the cable and reconnect them to the server
- D. Use a TDR to test both strands of a new replacement cable prior to connecting it to the server
Answer: C
NEW QUESTION 285
Drag and Drop Question
Your company recently purchased a new building down the street from the existing office.
For each of the tasks below, select the appropriate antenna type and encryption object for all wireless access point (AP).
1. Create an encrypted wireless connection between the two buildings
that BEST controls signal propagation, while maximizing security.
2. Restrict the wireless signal generated by the access points (AP's)
inside Building 1, so that it minimizes broadcast beyond the building.
3. Maximize wireless coverage inside Building 1.
4. Building 1's internal wireless network is for visitors only and must not require any special configuration on the visitor's device to connect.
Answer:
Explanation:
NEW QUESTION 286
An organization with one core and five distribution switches is transitioning from a star to a full-mesh topology Which of the following is the number of additional network connections needed?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 287
An engineer is reviewing the implementation requirements for an upcoming project. The basic requirements identified by the customer include the following:
Which of the following solution sets properly addresses all of the identified requirements?
- A. 802.11a, IPSec VPN, 802.1x
- B. 802.11b, PPTP, 802.1x
- C. 802.11n, SSL-VPN, 802.1x
- D. 802.11ac, MPLS, 802.3
- E. 802.11g, MS-CHAP, 802.16
Answer: C
NEW QUESTION 288
A username provides which of the following?
- A. Authentication
- B. Identification
- C. Biometrics
- D. Authorization
Answer: B
NEW QUESTION 289
A network technician needs to configure a device with an embedded OS so it can be connected to a wireless handheld scanner Which of the following technologies should be configured on the OS to create the wireless connection?
- A. Ad hoc
- B. Partial mesh
- C. But
- D. Ring
Answer: C
NEW QUESTION 290
A network technician does not have access to the GUI of a server and needs to adjust some network properties. Given the command:
Which of the following is the technician attempting to alter?
- A. The technician is adding a static IP address.
- B. The technician is clearing the subnet mas setting.
- C. The technician is clearing the route table.
- D. The technician is setting the default gateway.
Answer: D
NEW QUESTION 291
A server rack was moved from one floor to another. The network engineer needs to determine what physical changes to make on the network to ensure the server rack has connectivity. Which of the following should the network engineer consult?
- A. Standard operating procedures
- B. Wiring diagram
- C. Network baseline
- D. Inventory documentation
Answer: B
NEW QUESTION 292
A network technician is installing a new SOHO wireless router for a client. After configuring and securing the wireless network, the technician begins hardening the wireless router. Which of the following should the network technician do FIRST?
- A. Configure an ACL for managing the device.
- B. Enable content filtering.
- C. Back up the configurations of the device.
- D. Filter MAC addresses.
Answer: A
NEW QUESTION 293
A company's Chief Information Security Officer (CISO) has decided to increase overall network security by implementing two-factor authentication. All users already have username/password combinations and require an additional factor of authentication. Which of the following would satisfy the requirements?
- A. Access control lists
- B. RSA token
- C. Additional PIN
- D. Security questions
Answer: C
NEW QUESTION 294
A technician is connecting a PC to a switchport. At the wiring closet, the technician is identify which cable goes from patch panel a connected to the switch to patch panel B connected to the PC. Which of the following tools should the technician use to resolve the issue?
- A. Multimeter
- B. Tone generator
- C. Cable tester
- D. OTDR
Answer: C
NEW QUESTION 295
A network administrator reviews the following command output while troubleshooting a system that is unable to connect to the www.comptia.com website:
Which of the following is the reason the system cannot connect?
- A. The interface eth0 Is using an APIPA address.
- B. A cable is not connected to the NIC.
- C. The domain complia.com is having network issues.
- D. The DNS server is under maintenance.
Answer: C
NEW QUESTION 296
......
CompTIA N10-007 Exam Preparation Methods
Passing the CompTIA N10-007 exam is an uphill task. This is very unlikely that you will be able to clear it at your first attempt without proper preparation. To make it easier for you, we have made a list of the most effective preparation methods that you can apply to improve your performance. Let’s have a closer look at them:
- Make Sure You Assign Adequate Time for Revision
Regardless of how tight your timetable is, make sure you allocate adequate time for revision. An examinee should assign at least 30 days for his or her study. A few hours per day would be great. This will ensure you have gone through and mastered every concept of the certification exam.
- Take a Pre-Evaluation Test
Before you begin studying for your upcoming CompTIA N10-007 exam, take a pre-evaluation test to measure your current level of knowledge. This will enable you to reveal your weak areas so that you can allocate more time for them. Also, by taking it, you will save time by skipping the topics you already know.
- Revise with Practice Tests
If you use practice tests in your preparation for CompTIA N10-007, you are more likely gauge your understanding of the exam topics. Once you have studied all the concepts included in the syllabus, evaluate yourself with some mock tests. The score you get will indicate if you need to study more or if you are completely ready. The passing mark mostly reflects what you’ll get when you take the real exam. So, practice with as many sample questions as possible to understand which subjects still need your attention.
- Create a Detailed Study Plan
To ensure you cover all N10-007 exam topics systematically, draft a detailed study plan. When creating it, consider your obligations at work and at home. A strict timetable will help you avoid procrastination and forgetting some important issues in your preparation.
- Explore the Official Preparation Options
There are many training tools for CompTIA N10-007, but some may not be as efficient. If you do not want to spend your time on searching the valid study materials, look through the resources offered on the official website and credible sources like Amazon. There are plenty of options that might interest you, including instructor-led classes, virtual labs, study guides, video tutorials, among others. Read on to know more about the options available.
N10-007 Actual Questions and Braindumps: https://www.pass4surequiz.com/N10-007-exam-quiz.html
Pass N10-007 Exam with Updated N10-007 Exam Dumps PDF 2021: https://drive.google.com/open?id=16bmA4Ms5zhAhF8QTlz7K5ZuG9mlw__LY