[2022] Get Top-Rated Nutanix NCS-Core Exam Dumps Now
Passing Key To Getting NCS-Core Certified Exam Engine PDF
NEW QUESTION 67
Refer to the exhibit.
After performing ESXi to AHV conversion on a cluster, the alerts shown in the exhibit display on Prism. What should the administrator do to resolve this issue efficiently?
- A. Remove VMs from the Protection Domain and add them back in.
- B. Remove the VMs. create a new Protection Domain, and add VMs to it
- C. Delete the Protection Domain, create a new Protection Domain, and add the VMs to it
- D. Create a new Protection Domain and add the VMs to rt.
Answer: A
NEW QUESTION 68
The following critical Availability Alert displays in prism Central:
The protection Policy PP-BCA-1HR includes a business critical application with a 1-hour snapshot frequency.
What is causing this issue?
- A. Prism Central in the Availability Zone for PP-BCA-1HR is unavailable.
- B. NearSync replication between theAvailability Zones has fallen out of scope.
- C. There is a scheduled outage for the Availability Zone referenced in Protection Policy PP-BCA-1HR.
- D. Workloads included in PP-BCA-1HR are no longer within their intended RPO.
Answer: C
NEW QUESTION 69
A consultant notices while assigning VLAN tags to hosts and CVMs in a running cluster, that Prism Element displays alerts indicating a node is down.
What should the consultant do to prevent these alerts?
- A. Only change the Controller Virtual Machine VLANs.
- B. Stop the Nutanix cluster before changing VLANs.
- C. Only change the hypervisor VLANs.
- D. Restart the Nutanix cluster.
Answer: B
NEW QUESTION 70
A consultant needs to review a customer's switch port configuration to identify any issues. Other customer requirements are as follows:
* Leverage LACP
* Native VLAN will not be used
* Use Multiple Upstream switches
* Use VLANs 20-25 and 30
* LACP Fallback has been Enabled
* vPC or MLAG has been configured
What must be included in a configuration in order to meet these requirements?
- A. Native VLAN set to default
Ports trucked to allow all necessary VLANs - B. Native VLAN set to 30
Ports Trunked to allow all necessary VLANs - C. Native VLAN set to default
Ports in access mode to allow all necessary VLANs - D. Native VLAN set to 30
Ports in access mode to allow all necessary VLANs
Answer: A
NEW QUESTION 71
A customer wants to expand an existing cluster with three additional nodes. After running the Foundation process on the new nodes, the customer realizes that the wrong IPs where used and the nodes are configured on a different network. The customer decides to create a new cluster instead.
Which method should be used to recreate the cluster?
- A. Log into CVM and use cluster create command to create the cluster.
- B. Log into IPMI and use cluster create command to create the cluster.
- C. Foundation all nodes again and create the cluster.
- D. Log into Hypervisor and use cluster create command to create the cluster.
Answer: A
NEW QUESTION 72
During a six-node cluster deployment, one node fails to image successfully and Foundation is unable to automatically configure the cluster. The consultant decides to manually complete cluster formation with the successful nodes, then expand the cluster with the remaining unconfigured node.
Which command should be used to begin the process?
- A. cluster status
- B. cluster expand
- C. cluster start
- D. cluster create
Answer: D
NEW QUESTION 73
An administrator is deploying an application using Nutanix Volumes. After configuring the volume group and connecting the guest's iSCSI initiator to the volume group, they begin performance testing.
The administrator learns that performance on the virtual disk attached to the iSCSI initiator is far less than that of a virtual disk connected directly to the VM.
Which situation is causing this condition?
- A. Data Locality ensures that VM attached disks are always faster than iSCSI volumes.
- B. The VM's iSCSI traffic is being routed to the data services IP subnet
- C. The performance test is generating small block random 10.
- D. The duster data services IP address is a bottleneck, shared with other iSCSI traffic
Answer: D
NEW QUESTION 74
An administrator is deploying an application that requires maximum I/O throughput for scratch data. The administrator is concerned that the throughput requirement is greater than what can be provided by asingle cluster node.
What should the administrator do to meet this requirement?
- A. Create a volume group with one virtual disk attached to the VM
- B. Create a volume group with several virtual disks and attach to the VM
- C. Create a virtual disk attached tothe VM's PCI interface
- D. Create several virtual disks attached to the VM's virtual SCSI controller
Answer: B
Explanation:
Explanation
Ref:https://next.nutanix.com/community-blog-40/scaling-up-vm-storage-performance-on-ahv-volume-group-loa
NEW QUESTION 75
A consultant finishes creating a new ESXi cluster. The consultant connects to the nodes via laptop and a personal flat switch. The host/CVM network is on VLAN 23. The customer has the native VLAN on the ToR switches set to 23.
The customer wants to use LACP. Before placing the nodes on the customer network, the consultant tags VLAN 23 for each host and CVM. The consultant connects the nodes to the customer network and finds that they are unreachable.
What is causing this issue?
- A. The customer has LACP fallback enabled on switch ports.
- B. The host and CVM are incorrectly configured.
- C. The hosts have not been migrated to a vSphere Distributed Switch.
- D. Under the vSwitch0 settings, the consultant did not select Route based on IP hash.
Answer: C
NEW QUESTION 76
A consultant is performing a Nutanix Cluster installation on Dell XC Core hardware. The consultant decides to use Foundation Portable for Mac to perform the installation. When the consultant arrives onsite, Foundation Portable is unable to locate the new nodes.
Which log should the consultant check to troubleshoot this issue?
- A. /home/nutanix/foundation/log
- B. ~/data/logs/foundation
- C. ~/data/logs/foundation.out
- D. foundation.app/contents/resouces/log
Answer: A
NEW QUESTION 77
A consultant is setting up a new Hyper-V cluster. The customer requirements are as follows:
* VMs should automatically failover to another host if the host crashes
* Host CPU and Memory resources should be evenly balanced
* New VMs should be placed on the host with the most resources available Which two Hyper-V features can be used to meet the requirements? (Choose two.)
- A. High Availability
- B. Failover Clustering
- C. Distributed Resource Scheduler
- D. Performance Resource Optimization
Answer: B,D
NEW QUESTION 78
Refer to the exhibit.
An administrator logged into Prism Element, notices the following in the home dashboard, and showing the exhibit.
Which action should the administrator take next?
- A. Configure the fqdn for the hosts indicated
- B. Re-run NCC specifying data_resiliency_check
- C. Check the hardware page for disk failures
- D. Troubleshoot the zookeeper server issue
Answer: B
NEW QUESTION 79
An administrator is configuring software only. Data-at-Rest Encryption on their Nutanix cluster. They are planning to deploy a third-party key management server (KMS).
Where should this server be hosted?
- A. As a single VM deployed on the host that contains the Prism leader CVM
- B. As a clustered VM setup on the Nutanix cluster
- C. As a single VM on the Nutanix cluster
- D. On hardware external to the Nutanix duster
Answer: D
Explanation:
NEW QUESTION 80
After deploying an AHV cluster connected to Cisco Nexus 9k switches, unexpected network behavior is observed. The consultant needs to rule out physical network mis-cabling without returning to the datacenter.
Which command from the host should the consultant run?
- A. lldpctl
- B. show cdp neighbors
- C. show lldp neighbors
- D. show interfaces
Answer: A
NEW QUESTION 81
A consultant has deployed a Nutanix cluster with AOS 5.10.x, then discovers the customer's environment is running on AOS 5.6.x. The consultant decides to re-image the cluster using the foundation Java applet. During the Foundation discovery, all cluster nodes display a status of Unavailable.
What should the consultant do to resolve the issue?
- A. Use the Phoenix ISO
- B. Restart the Genesis service on the cluster.
- C. Reset the IPMI IP addresses.
- D. Destroy the cluster.
Answer: D
NEW QUESTION 82
A customer wants to use NIC teaming on an ESXi host using a vSphere Standard Switch configured with the Route based on physical NIC load load balancing option. The customer does not see the option when editing the Teaming and Failover settings for the switch.
How should the consultant resolve this issue?
- A. Install a vCenter server to manage the switch
- B. Add another physical NIC to the team.
- C. Add a vSphere Distributed Switch
- D. Change the load balancing option on the switch.
Answer: C
NEW QUESTION 83
Where can a consultant find Nutanix Enablement Starter Packs (ESPs)?
- A. In the Partner Portal
- B. In the Support Portal
- C. In the Services section of the Nutanix website.
- D. In the Nutanix .NEXT Community Forum
Answer: A
NEW QUESTION 84
A consultant is running Foundation. The cluster creation fails during the process. The host logs confirm that the nodes have been successfully imaged. The consultant decides to create the cluster manually.
Which command should the consultant use?
- A. cluster -s IP_CVM_A, IP_CVM_B, IP_CVM_n create_manual
- B. cluster -s IP_CVM_M, IP_CVM_B, IP_CVM_n create
- C. cluster -c IP_CVM_A, IP_CVM_B, IP_CVM_n
- D. cluster create -s IP_CVM_A, IP_CVM_B, IP_CVM_n
Answer: D
NEW QUESTION 85
A customer has a four-node cluster and is using Volume Groups toprovide storage services to a SQL cluster.
In the event of a CVM failure in the cluster, what is the expected IO path of the volume group's iSCSI targets?
- A. vDisk directed at failure CVM are redirected to Data Services IP until CVM is reconnected
- B. vDisk directed to failed CVM are redirected to another CVM and automatically reconnect
- C. vDisk directed at failed CVM will disconnect and reconnect when thefailed CVM comes back online
- D. vDisk directed to CVM that failed to disconnect and will not reconnect without manual intervention
Answer: B
NEW QUESTION 86
An administrator is trying to correct high cluster IOPs and Cluster Controller Latency. Networking is the suspected issue.
Which networking parameters should be configured in the Nutanix cluster?
- A. Number of NICs connected and network latency.
- B. Bond State and network latency
- C. Number of NICs connected and frame size
- D. Number of NICs connected and bond state.
Answer: C
NEW QUESTION 87
......
Registration process of the Nutanix NCS-Core Certification Exam:
Step 1: Visit the Pearson VUE website and enter the required information to take your exam. You will need a Social Security or Federal ID number, a credit card, and verification of either education or work experience. Once you have entered your information, you will be able to schedule an exam appointment on the Pearson VUE website.
Step 2: You will receive an email confirmation from the Pearson VUE website with details on where to report for your exam reservation on a specified date and time. Your reservation is not confirmed until you have received this email confirmation So it is important to watch for it. Nutanix NCS-Core Dumps help you to get success in the exam.
Step 3: Please review all instructions and instructions for parking and traffic, if applicable, before arriving at the testing center. You will need check-in on-site at the Pearson VUE Testing Center 15 minutes prior to your exam appointment time. Visitor parking is available on-site and there is also street parking available.
Step 4: After you have picked up your test booklets and submitted the required paperwork, you can begin taking your Nutanix NCS-Core Exam.
Step 5: We recommend that you allow 30 minutes to complete your exam.
NCS-Core exam questions for practice in 2022 Updated 195 Questions: https://www.pass4surequiz.com/NCS-Core-exam-quiz.html
NCS-Core Exam Dumps Pass with Updated Tests Dumps: https://drive.google.com/open?id=1-8Wmbdw3ochmzXb-HroEfkZJKngaCO4n