[2023] NCP-MCI-6.5 All-in-One Exam Guide Practice To your NCP-MCI-6.5 Exam!
Preparations of NCP-MCI-6.5 Exam 2023 Nutanix Certified Professional Unlimited 174 Questions
NEW QUESTION # 43
An Administrator is working on a one-node ROBO cluster configurations
Which statement is true for this configuration?
- A. the minimum RPO 8 hours required
- B. witness vm should be 8vcp and 20gb ram
- C. Witness vm required to break cluster quoram
- D. Supported hardware is NX-1175-G5 and G6
Answer: D
NEW QUESTION # 44
In Nutanix clusters, which feature ensures VMs can be migrated and restarted on another host in case of failure?
- A. Host Affinity Rules
- B. High Availability
- C. Availability Zone
- D. Protection Domain
Answer: B
NEW QUESTION # 45
An administrator manages a cluster and notices several failed components shown in the exhibit.
What two options does the administrator have to run all NCC checks manually? (Choose two.)
- A. Running noc health_checks run_all on the PC VM
- B. Using the action action drop-down menu in the Health dashboard of Prism Central
- C. Using the Actions drop-down menu in the Health dashboard of Prism Element.
- D. Running ncc health_checks run-alll on the CVM
Answer: C,D
NEW QUESTION # 46
After configuring Active Directory as the desired authentication service, an administrator is not able to login into Prism Central using privileged account.
Which configuration must be checked first?
- A. Local user account
- B. Role Mapping
- C. Cluster Lockdown
- D. Account lock status
Answer: B
Explanation:
According to the Nutanix Community1, users can authenticate using their Active Directory credentials when Active Directory support is enabled for Prism Central. To enable Active Directory support, you need to configure Role Mapping12, which defines how Active Directory groups map to Prism Central roles.
https://next.nutanix.com/ncm-intelligent-operations-formerly-prism-pro-ultimate-26/configuring-authentication-38051
NEW QUESTION # 47
An administrator needs to periodically send information about cluster efficiency via email to a set of users.
What should be configured to accomplish this task?
- A. Add a schedule to Prism Central reports.
- B. update Capacity Configurations in Prism Central.
- C. Configure Efficiency widget in Prism Central.
- D. Create a new' prism Central project.
Answer: A
Explanation:
To periodically send information about cluster efficiency via email to a set of users, the administrator can follow these steps:
Create a report in Prism Central that contains the relevant information about cluster efficiency.
Add a schedule to the report to generate and send the report via email to the set of users at a specified frequency.
This will ensure that the users receive regular updates about the cluster efficiency without the need for manual intervention.
NEW QUESTION # 48
Which three cluster operations require an administrator to reclaim licenses?(Choose three)
- A. Destroy a cluster.
- B. Move Nodes between clusters.
- C. Upgrade a cluster
- D. Migrate a cluster
- E. Remove a Node from a cluster
Answer: A,B,E
Explanation:
Explanation
https://portal.nutanix.com/page/documents/details/?targetId=Web_Console_Guide-Prism_v4_7:lic_licensing_ma Reclaiming Licenses (Including License Renewal) You can reclaim and optionally re-apply licenses for nodes in your clusters:
* You must reclaim licenses when you plan to destroy a cluster. First reclaim the licenses, then destroy the cluster. You do not need to reclaim Starter licenses. These licenses are automatically applied whenever you create a cluster, including after you have destroyed a cluster.
* Return licenses to your inventory when you remove one or more nodes from a cluster. Also, if you move nodes from one cluster to another, first reclaim the licenses, move the nodes, then re-apply the licenses.
* You can reclaim licenses for nodes in your clusters in cases where you want to make modifications or downgrade licenses. For example, applying an Ultimate license to all nodes in a cluster where some nodes are currently licensed as Pro and some nodes are licensed as Ultimate. You might also want to transition nodes from Ultimate to Pro licensing.
* You must reclaim licenses when you renew licenses. First reclaim the expired licenses, then apply new licenses.
NEW QUESTION # 49
CPU utilization climbs above 90% on several VMs. This causes performance degradation for a business-critical application.
How can alerts be configured to notify the administrator before VM CPU utilization hits 90%?
- A. On the Alerts dashboard, ensure that the VM CPU usage alert is not set to auto-resolve.
- B. On a CVM, configure a cron job to run the VM CPU Check more frequently and email the result.
- C. On the Health dashboard, locate the VM CPU Check and lower the alert threshold below 90%.
- D. On a CVM, use ncli to set the VM CPU Check threshold for the critical VMs to a value below 90%.
Answer: C
NEW QUESTION # 50
A Nutanix cluster is equipped with four nodes. Four VMs on this cluster have been configured with a VM-VM anti-affinity policy and are each being hosted by a different node.
What occurs to the cluster and these VMs during an AHV upgrade?
- A. One node hosts two VMs while the node being upgraded is in maintenance mode.
- B. The AHV pre-upgrade checks fail until the administrator disables the anti-affinity policy.
- C. One VM out of the four powers down when the node hosting it reboots.
- D. The AHV pre-upgrade checks fail until the four VMs are powered off.
Answer: B
NEW QUESTION # 51
After logging into Prism Element, an administrator presses the letter A on the Keyboard.
What is the expected outcome of this input?
- A. API Explorer page will launch
- B. Alerts page will launch
- C. Analysis will launch
- D. About Nutanix page will launch
Answer: B
NEW QUESTION # 52
An administrator is troubleshooting vDisk performance issues in a Nutanix cluster with hybrid disks. The VMs all have Flash Mode enabled.
But users are reporting disk latency.
What could cause the performance issues?
- A. The VMs vDisks are in multiple containers.
- B. Compression is disabled on the vDisk storage container.
- C. Data size for flash mode exceeds 25% of the SSD capacity.
- D. Flash mode is disabled when a node fails.
Answer: C
NEW QUESTION # 53
In Files, how many FSVMs are deployed by default?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 54
The administrator recently had a node fail in an AHV Nutanix cluster. All of the VMs restarted on other nodes in the cluster, but they discovered that the VMs that make up a SQL cluster were running on the failed host. The administrator has been asked to take measures to prevent a SQL outage in the future.
What affinity option will prevent the SQL VMs from running on the same hos?
- A. VM-VM anti-Affinity policy
- B. Create Affinity Category
- C. Create Affinity Project
- D. VM-Most Affinity policy
Answer: A
NEW QUESTION # 55
After running an LCM inventory it is noticed that there are a number of firmware and software updates available. The administrator would like to avoid any host reboots, but would like to apply some of the available updates?
- A. M.2 Drives
- B. AHV
- C. AOS
- D. Data Drives
Answer: B,C
Explanation:
Explanation
AHV is the Acropolis Hypervisor that is used to run Nutanix clusters, and firmware and software updates can be applied to it without requiring any host reboots. AOS is the Acropolis Operating System that includes the hypervisor, storage and management components of the Nutanix cluster, and firmware and software updates can also be applied to it without requiring any host reboots.
NEW QUESTION # 56
A newly-hired Nutanix administrator was tasked by the CIO to create a single VM on a test network. The network administrator stated that a native VLAN was used on the Cisco TOR switches with the following parameters:
IP address:172,16.1.2
Network Mask: 255.255.255.0
Default gateway: 172.16.1.1
VLAN:1
The same parameters were used to create a network profile on Nutanix, but the when the VM was on ...
What should the Nutanix administrator do to fix this issue?
- A. Nutanix removed support for native VLAN.
- B. Use DHCP as opposed to static IP
- C. Change VLAN field from vlan. 1 to vlan.0.
- D. Enable IPv6 on the VM.
Answer: C
NEW QUESTION # 57
An administrator needs to ensure logs, alerts and information is consistent across clusters that are located in different countries.
Which service needs to be configured?
- A. NTP
- B. SMTP
- C. SNMP
- D. DNS
Answer: A
Explanation:
NTP service needs to be configured to ensure logs, alerts and information is consistent across clusters that are located in different countries. NTP stands for Network Time Protocol and it is used to synchronize the clocks of all the nodes in a cluster1. This helps to maintain accurate timestamps for logs, alerts and other information that are generated by Nutanix clusters1.
NEW QUESTION # 58
A customer has a newly-deployed AHV cluster with nodes that have 2.x 10 GBE and 2.x interface. The customer wants to use all available network interfaces to provide connectivity to the VMs.
Which option should the administrator use to achieve this while remaining consistent with Nutanix recommendations?
- A. Create a second bridge on each host and assign the 1GbE interfaces to it.
- B. Create a second bond on br0 on each host and assign the 1 GbE interfaces to it.
- C. Createbond1 on virbr0 and add the 1GbE interfaces to it for VM use.
- D. Create separate VLANs that map 10GbE and 1GbE interfaces.
Answer: A
NEW QUESTION # 59
An administrator wants to have a VM on an AHV cluster with access to multiple VLANs. What is the most efficient way to achieve this?
- A. Use one vNIC per VLAN for the VM.
- B. Use SFPs that allow the needed VLANs.
- C. Update a vNIC on the VM to operate in trunked mode for all desired VLANs.
- D. Create a network in AHV associated with all those VLANs on all hosts.
Answer: C
NEW QUESTION # 60
An administrator is preparing to deploy a new application on an AHV cluster, Security requirements dictate that all virtual servers supporting this application must be prevented from communicating with unauthorized hosts.
Which option would achieve this goal?
- A. Create new' subnet and assign to an existing VPC assign the IP prefix and gateway for the subnet, deploy servers with vNlC5 in the new subnet.
- B. Create a new VLAN, create a subnet on the cluster with the VLAN tag, deploy servers with vNlCs in the new subnet.
- C. Create a new Application Security Policy restricting communication to the authorized hosts and apply it to the servers in enforce mode.
- D. Create a new solation Environment policy apply it to the new servers and all authorized hosts.
Answer: C
Explanation:
An Application Security Policy is a security feature in Nutanix AHV that can be used to restrict network communication between virtual servers based on a variety of criteria, such as IP address, port, and protocol. By creating a policy that restricts communication to authorized hosts and applying it to the servers in enforce mode, the administrator can prevent unauthorized communication between virtual servers.
https://www.nutanix.com/products/ahv
NEW QUESTION # 61
Async DR is configured between two sites. A network outage occurs at the primary site.
Which steps must the administrator perform to bring the VMs back into service at the backup site?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the drop-down option.
Answer:
Explanation:
NEW QUESTION # 62
......
The NCP-MCI-6.5 certification exam is designed to ensure that IT professionals have the skills and knowledge required to deploy and manage Nutanix Multicloud Infrastructure. Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) v6.5 exam certification validates the skills of the IT professional in the areas such as deploying, administering, and troubleshooting Nutanix Multicloud Infrastructure. Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) v6.5 exam certification demonstrates that the IT professional has a deep understanding of Nutanix Multicloud Infrastructure, and is capable of working with the platform to meet the needs of the business.
Focus on NCP-MCI-6.5 All-in-One Exam Guide For Quick Preparation: https://www.pass4surequiz.com/NCP-MCI-6.5-exam-quiz.html
Practice To NCP-MCI-6.5 - Pass4SureQuiz Remarkable Practice On your Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) v6.5 exam Exam: https://drive.google.com/open?id=1_BVvemz_83S9shHAMY_9cemPwjD6t4GS