Latest NSE7_OTS-7.2 Actual Free Exam Questions Updated 52 Questions
Free NSE7_OTS-7.2 Exam Braindumps certification guide Q&A
To become certified in Fortinet NSE7_OTS-7.2, candidates need to have a deep understanding of OT networks and the security challenges they face. NSE7_OTS-7.2 exam covers a wide range of topics, including industrial control systems (ICS), SCADA systems, network segmentation, access control, risk management, and incident response. Candidates also need to have a good understanding of Fortinet's security solutions, including FortiGate, FortiAnalyzer, FortiManager, and FortiSIEM.
Fortinet NSE7_OTS-7.2 (Fortinet NSE 7 - OT Security 7.2) Certification Exam is designed to validate the knowledge and skills of professionals who work with operational technology (OT) security solutions. Fortinet NSE 7 - OT Security 7.2 certification exam focuses on the advanced concepts and technologies used to secure OT systems against cyber threats, including malware, ransomware, and other attacks. NSE7_OTS-7.2 exam also covers the best practices for designing, implementing, and managing OT security solutions across various industries, such as manufacturing, energy, and transportation.
NEW QUESTION # 15
An OT supervisor needs to protect their network by implementing security with an industrial signature database on the FortiGate device.
Which statement about the industrial signature database on FortiGate is true?
- A. By default, the industrial database is enabled.
- B. A supervisor must purchase an industrial signature database and import it to the FortiGate.
- C. A supervisor can enable it through the FortiGate CLI.
- D. An administrator must create their own database using custom signatures.
Answer: C
NEW QUESTION # 16
Refer to the exhibit.
An OT administrator ran a report to identify device inventory in an OT network.
Based on the report results, which report was run?
- A. A FortiAnalyzer device report
- B. A FortiSIEM incident report
- C. A FortiSIEM analytics report
- D. A FortiSIEM CMDB report
Answer: D
NEW QUESTION # 17
Refer to the exhibit and analyze the output.
Which statement about the output is true?
- A. This is a sample of an SNMP temperature control event log.
- B. This is a sample of a FortiAnalyzer system interface event log.
- C. This is a sample of FortiGate interface statistics.
- D. This is a sample of a PAM event type.
Answer: D
NEW QUESTION # 18
In a wireless network integration, how does FortiNAC obtain connecting MAC address information?
- A. MAC notification traps
- B. RADIUS
- C. End station traffic monitoring
- D. Link traps
Answer: B
Explanation:
Explanation
FortiNAC can integrate with RADIUS servers to obtain MAC address information for wireless clients that authenticate through the RADIUS server.
NEW QUESTION # 19
An OT supervisor has configured LDAP and FSSO for the authentication. The goal is that all the users be authenticated against passive authentication first and, if passive authentication is not successful, then users should be challenged with active authentication.
What should the OT supervisor do to achieve this on FortiGate?
- A. Under config user settings configure set auth-on-demand implicit.
- B. Configure a firewall policy with FSSO users and place it on the top of list of firewall policies.
- C. Enable two-factor authentication with FSSO.
- D. Configure a firewall policy with LDAP users and place it on the top of list of firewall policies.
Answer: B
Explanation:
Explanation
The OT supervisor should configure a firewall policy with FSSO users and place it on the top of list of firewall policies in order to achieve the goal of authenticating users against passive authentication first and, if passive authentication is not successful, then challenging them with active authentication.
NEW QUESTION # 20
Refer to the exhibit.
An OT network security audit concluded that the application sensor requires changes to ensure the correct security action is committed against the overrides filters.
Which change must the OT network administrator make?
- A. Remove IEC.60870.5.104 Information.Transfer from the first filter override.
- B. Set all application categories to apply default actions.
- C. Change the security action of the industrial category to monitor.
- D. Set the priority of the C.BO.NA.1 signature override to 1.
Answer: D
Explanation:
Explanation
According to the Fortinet NSE 7 - OT Security 6.4 exam guide1, the application sensor settings allow you to configure the security action for each application category andnetwork protocol override. The security action determines how the FortiGate unit handles traffic that matches the application category or network protocol override. The security action can be one of the following:
Allow: The FortiGate unit allows the traffic without any further inspection.
Monitor: The FortiGate unit allows the traffic and logs it for monitoring purposes.
Block: The FortiGate unit blocks the traffic and logs it as an attack.
The priority of the network protocol override determines the order in which the FortiGate unit applies the security action to the traffic. The lower the priority number, the higher the priority. For example, a priority of 1 is higher than a priority of 10.
In the exhibit, the application sensor has the following settings:
The industrial category has a security action of allow, which means that the FortiGate unit will not inspect or log any traffic that belongs to this category.
The IEC.60870.5.104 Information.Transfer network protocol override has a security action of block, which means that the FortiGate unit will block and log any traffic that matches this protocol.
The IEC.60870.5.104 Control.Functions network protocol override has a security action of monitor, which means that the FortiGate unit will allow and log any traffic that matches this protocol.
The IEC.60870.5.104 Start/Stop network protocol override has a security action of allow, which means that the FortiGate unit will not inspect or log any traffic that matches this protocol.
The IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override has a security action of block, which means that the FortiGate unit will block and log any traffic that matches this protocol.
The problem with these settings is that the IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override has a lower priority than the IEC.60870.5.104 Information.Transfer network protocol override. This means that if the traffic matches both protocols, the FortiGate unit will apply the security action of the higher priority override, which is block. However, the IEC.60870.5.104 Transfer.C.BO.NA.1 protocol is used to transfer binary outputs, which are essential for controlling OT devices. Therefore, blocking this protocol could have negative consequences for the OT network.
To fix this issue, the OT network administrator must set the priority of the IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override to 1, which is higher than the priority of the IEC.60870.5.104 Information.Transfer network protocol override. This way, the FortiGate unit will apply the security action of the lower priority override, which is allow, to the traffic that matches both protocols. This will ensure that the FortiGate unit does not block the traffic that is used to transfer binary outputs, while still blocking the traffic that is used to transfer information.
1: NSE 7 Network Security Architect - Fortinet
NEW QUESTION # 21
An OT network architect needs to secure control area zones with a single network access policy to provision devices to any number of different networks.
On which device can this be accomplished?
- A. FortiEDR
- B. FortiSwitch
- C. FortiGate
- D. FortiNAC
Answer: C
Explanation:
Explanation
An OT network architect can accomplish the goal of securing control area zones with a single network access policy to provision devices to any number of different networks on a FortiGate device.
NEW QUESTION # 22
What are two benefits of a Nozomi integration with FortiNAC? (Choose two.)
- A. Enhanced point of connection details
- B. Adapter consolidation for multi-adapter hosts
- C. Importation and classification of hosts
- D. Direct VLAN assignment
Answer: A,C
Explanation:
Explanation
The two benefits of a Nozomi integration with FortiNAC are enhanced point of connection details and importation and classification of hosts. Enhanced point of connection details allows for the identification and separation of traffic from multiple points of connection, such as Wi-Fi, wired, cellular, and VPN. Importation and classification of hosts allows for the automated importing and classification of host and device information into FortiNAC. This allows for better visibility and control of the network.
NEW QUESTION # 23
An OT administrator configured and ran a default application risk and control report in FortiAnalyzer to learn more about the key application crossing the network. However, the report output is empty despite the fact that some related real-time and historical logs are visible in the FortiAnalyzer.
What are two possible reasons why the report output was empty? (Choose two.)
- A. The administrator selected the wrong devices in the Devices section.
- B. The administrator selected the wrong hcache table for the report.
- C. The administrator selected the wrong logs to be indexed in FortiAnalyzer.
- D. The administrator selected the wrong time period for the report.
Answer: A,D
Explanation:
Explanation
https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/32cb817d-a307-11eb-b70b-0050569258
NEW QUESTION # 24
Which three methods of communication are used by FortiNAC to gather visibility information? (Choose three.)
- A. TACACS
- B. ICMP
- C. RADIUS
- D. SNMP
- E. API
Answer: C,D,E
NEW QUESTION # 25
What can be assigned using network access control policies?
- A. Logical networks
- B. FortiNAC device polling methods
- C. Layer 3 polling intervals
- D. Profiling rules
Answer: A
NEW QUESTION # 26
An OT administrator is defining an incident notification policy using FortiSIEM and would like to configure the system with a notification policy. If an incident occurs, the administrator would like to be able to intervene and block an IP address or disable a user in Active Directory from FortiSIEM.
Which step must the administrator take to achieve this task?
- A. Define a script/remediation on FortiManager and enable a notification rule on FortiSIEM.
- B. Create a notification policy and define a script/remediation on FortiSIEM.
- C. Configure a fabric connector with a notification policy on FortiSIEM to connect with FortiGate.
- D. Deploy a mitigation script on Active Directory and create a notification policy on FortiSIEM.
Answer: B
Explanation:
Explanation
https://fusecommunity.fortinet.com/blogs/silviu/2022/04/12/fortisiempublishingscript
NEW QUESTION # 27
Refer to the exhibit.
You need to configure VPN user access for supervisors at the breach and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.
What must you do to achieve this objective?
- A. You must register the same FortiToken on more than one FortiGate.
- B. You must use a FortiAuthenticator.
- C. You must use a third-party RADIUS OTP server.
- D. You must use the user self-registration server.
Answer: B
NEW QUESTION # 28
You are investigating a series of incidents that occurred in the OT network over past 24 hours in FortiSIEM.
Which three FortiSIEM options can you use to investigate these incidents? (Choose three.)
- A. Security
- B. Overview
- C. List
- D. IPS
- E. Risk
Answer: B,C,E
NEW QUESTION # 29
Refer to the exhibits.
Which statement is true about the traffic passing through to PLC-2?
- A. IPS must be enabled to inspect application signatures.
- B. SSL Inspection must be set to deep-inspection to correctly apply application control.
- C. IEC 104 signatures are all allowed except the C.BO.NA 1 signature.
- D. The application filter overrides the default action of some IEC 104 signatures.
Answer: D
NEW QUESTION # 30
Refer to the exhibit.
An OT architect has implemented a Modbus TCP with a simulation server Conpot to identify and control the Modus traffic in the OT network. The FortiGate-Edge device is configured with a software switch interface ssw-01.
Based on the topology shown in the exhibit, which two statements about the successful simulation of traffic between client and server are true? (Choose two.)
- A. NAT is disabled in the FortiGate firewall policy from port3 to ssw-01.
- B. Port5 is not a member of the software switch.
- C. The FortiGate devices is in offline IDS mode.
- D. The FortiGate-Edge device must be in NAT mode.
Answer: A,D
NEW QUESTION # 31
What triggers Layer 2 polling of infrastructure devices connected in the network?
- A. A matched security policy
- B. A linkup or linkdown trap
- C. A matched profiling rule
- D. A failed Layer 3 poll
Answer: B
NEW QUESTION # 32
......
Fortinet NSE7_OTS-7.2 certification exam is designed for individuals who are looking to validate their skills and knowledge in the field of operational technology (OT) security. As OT systems become increasingly interconnected with IT networks, the need for professionals with specialized knowledge in this area has grown. NSE7_OTS-7.2 exam covers a range of topics including OT security concepts, OT network design and implementation, and OT security operations and management.
NSE7_OTS-7.2 Certification Overview Latest NSE7_OTS-7.2 PDF Dumps: https://www.pass4surequiz.com/NSE7_OTS-7.2-exam-quiz.html
Top Fortinet NSE7_OTS-7.2 Exam Audio Study Guide! Practice Questions Edition: https://drive.google.com/open?id=1-R35irTA16ijVLCr5-Pz83d72Me5SH1G