Prepare Top F5 301 Exam Study Guide Practice Questions Edition
Go to 301 Questions - Try 301 dumps pdf
How much 301a - LTM Technology Specialist Cost
The price of 301a - LTM Technology Specialist is $150 USD.
NEW QUESTION 26
A monitor has been defined with an alias port of 443. All other options are left at their defaults. The administrator
wishes to assign it to a pool of members where the members' ports vary. Which is the result?
- A. For each member. If it is running an SSL service at the member port, the monitor may work. Otherwise, the monitor will fail and the member for each member, if it is running an SSL service at the member port, the monitor may work. Otherwise, the monitor will fail and the member will be marked down.
- B. This assignment is not allowed since the port do not match.
- C. For each member, the monitor will test member node at port 443. For each member, the monitor will test the member ? node at port 443.
- D. For each member, if the member port is not 443, the member will be marked down. For each member,if the member? Port is not 443, the member will be marked down.
Answer: C
NEW QUESTION 27
Why would an administrator capture monitor traffic between a BIG-IP and servers?
- A. Only client traffic may be captured; monitor traffic may not be captured.
- B. Viewing monitor traffic could help the administrator to define a more robust monitor.
- C. If a client were having difficulty logging into a load-balanced SSH server, viewing and analyzing the connection process would determine the reason.
- D. If client traffic to servers was failing, viewing and analyzing monitor traffic would determine the reason.
Answer: B
NEW QUESTION 28
A BIG-IP has two SNATs, a pool of DNS servers and a virtual server configured to load-balance UDP traffic to the DNS servers. One SNAT's address is 64.100.130.10; this SNAT is defined for all addresses.
The second SNAT's address is 64.100.130.20; this SNAT is
defined for three specific addresses, 172.16.3.54, 172.16.3.55, and 172.16.3.56. The virtual server's destination is
64.100.130.30:53.
The SNATs and virtual server have default VLAN associations. If a client with IP address 172.16.3.55 initiates a request to the virtual server, what is the source IP address of the packet as it reaches the chosen DNS server?
- A. 64.100.130.30
- B. 172.16.3.55
- C. 64.100.130.10
- D. 64.100.130.20
Answer: D
NEW QUESTION 29
When a pool is created and saved to file, where is the default file and location for the pool configuration? When a pool is created and saved to file, where is the default file and location for the pool configuration?
- A. /etc/bigip_base.conf
- B. /config/bigip_base.conf
- C. /config/BigDB.dat
- D. lconfig/bigip.conf
Answer: D
NEW QUESTION 30
Which three files/data items are included in a BIG-IP UCS backup file? (Choose three.)
- A. the BIG-IP log files
- B. the BIG-IP host name
- C. the BIG-IP administrative addresses
- D. the BIG-IP default traps
- E. the BIG-IP license
Answer: B,C,E
NEW QUESTION 31
Which action CANNOT be performed by an iRule?
- A. Direct a client's request to a pool based on the client's browser's language.
- B. Limit a given client to a set amount of bandwidth.
- C. Chang the virtual server's default pool.
- D. Substitute a server's response with alternate data.
- E. Discard a client before connecting to a server.
- F. Direct a connection request to a specific pool.
Answer: C
NEW QUESTION 32
A, steaming profile will do which of the following?
- A. Search and replace all occurrences of a specified string only is responses processed by a virtual server.
- B. Search and replace the first occurrence of a specified of a specified string in either a request or response processed by a virtual server.
- C. Search and replace all occurrences of a specified string only in request processed by a virtual server.
- D. Search and replace all occurrences of a specified string in requests and responses processed by a virtual server.
Answer: D
NEW QUESTION 33
How is traffic flow through transparent virtual servers different from typical virtual servers?
- A. an IP address
- B. any bytes within the initial client request packet
- C. any text string within a cookie
- D. the value in the tcp acknowledgement field
Answer: A,C
NEW QUESTION 34
When defining a load-balancing pool using the command line, if the load-balancing method is not specified, what is the result
- A. The system would prompt the user for a load-balancing method.
- B. The default load-balancing method would be used.
- C. The load-balancing method of the previous pool would be used.
- D. An error would be displayed since no load-balancing method was specified.
Answer: B
NEW QUESTION 35
Which two statements are true concerning capabilities of current BIG-IP platforms?
(Choose two.)
- A. All current BIG-IP platform use both an ASIC. And CPU(s)to process traffic.
- B. All current BIG-IP platform can perform hardware compression.
- C. The 1600 hosts more ports than the 3900.
- D. Only 2U BIG-IP Platform have an option of a second power supply.
- E. All BIG-IP have capacity to perform bulk encryption I decryption of SSL traffic independent of the CPU.
Answer: A,E
NEW QUESTION 36
Which statement describes advanced shell access correctly?
Which statement describes advanced shell access correctly?
- A. Users with advance shell access are limited to changing, adding, or deleting LTM object in any single partition. Users with? Advance shell accesses are limited to changing, adding, or deleting LTM object on any single partition.
- B. All Users can be given advanced shell access. All users can be given advance shell access.
- C. Users with advanced shell access can always change, add, or delete LTM objects in all partition. Users with? Advanced shell access can always, change, add, or delete LTM objects in all partitions.
- D. Users with advance shell access have the same right as those with msh access, but the right extend to all partition rather than to Users with advance shell access have the same right as those with msh access, but right extend to all partition rather than to a single partition.
Answer: C
NEW QUESTION 37
Which statement is true concerning iRule context?
- A. the context must be explicitly declared.
- B. The rule command determines the context.
- C. The results of the iRule's conditional statement determines the context.
- D. The iRule event declaration determines the context.
Answer: D
NEW QUESTION 38
Which persistence method will always recognize a client when the client returns to the same virtual server?
- A. No persistence method work in all situations.
- B. SSL
- C. MSRDP
- D. expression [universal]
- E. source address
Answer: A
NEW QUESTION 39
An LTM has the 3 virtual servers, 2 SNATs, four self IP addresses defined and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults.
Assume port exhaustion has not been reached. VirtualServerl Destination: 10.10.2.102:80 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.1 61.16 network SNAT Automap configured V VirtualServer2 Destination: 10.10.2.102:* netmask
255.255.255.255 Transparent with 3 pool members
in the 192.168/16 network VirtualServer3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNATI Source IP: 10.10.0.0 netmask 255.255.0.0 SNAT Address: SNAT Pool with 2 members
172.16.20.50 and 192.168.10.50 SNAT2 Source IP: All Addresses SNAT Address: 10.10.2.103 Floating Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1 A connection attempt is made with a source IP and port of 10.20.100.50:2222 and a destination IP and port of 10.10.2.102:443. When the request is processed, what will be the source and destination IP addresses?
- A. Source IP: 10.10.2.103; Destination IP: 10.10.2.102
- B. Source IP: 10.10.201; Destination IP: 10.102.102
- C. Source IP: 10.20.10.50; Destination IP: pool member in the 192.168/16 network
- D. The request will be dropped.
- E. Source IP: 10.10.201; Destination IP: pool member in the 192.168/16 network G
- F. Source IP: 10.10.2.103; Destination IP: pool member in the 192.168/16 network
Answer: A
NEW QUESTION 40
QUESTION NO: 34. Click the Exhibit Button an LTM has the 3 virtual servers, a SNAT defined, four self IP addresses defined and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults. VirtualServer 1 Destination: 10.10.1.102:80 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network SNAT Automap enabled VirtualServer2 Destination: 10.10.1.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network VirtualServer 3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNATI Source IP: All Addresses SNAT Address: SNAT Pool with 2 members -
172.16.20.50 and
192.168.10.50 Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1 A connection attempt is made with a source IP and port of 10.20.100.50:80 and a destination IP and port of 10.10.2.10:80. When the request is processed, what will be the source and destination IP addresses?
- A. Source IP: Either 172.16.20.50 or 192.168.10.50; Destination IP: 10.10.2010
- B. Source IP: 10.10.2.1; Destination IP: 10.10.2.10
- C. The request will be dropped.
- D. Source IP: 10.20.100.50; Destination IP: 10.10.2.10
Answer: A
NEW QUESTION 41
What occurs when a load?command is issued?What occurs when a ? load?command is issued?
- A. rootbigipsystem[Active][tmos.Itm.pool]#create pooh members add {172.16.20.1:80{priority- group 2}}
- B. rootbigipsystem[Active][tmos.Itm.pool]#create pooh members add {170.16.20.1:80}
- C. rootbigipsystem[Active][tmos.Itm.pool]#create pooh members add {172.16.20.1:80{} }
- D. rootbigipsystem[Active][tmos.Itm.pool]#create pooh members add {172.16.20.1:80}
Answer: B
NEW QUESTION 42
A site wishes to use an external monitor. Other than what is coded in the monitor script, what information must be configured on the BIG-IP for the monitor to be functional? (Choose two.)
- A. BIG-IP must know the name of the program.
- B. BIG-IP the IP addresses of the devices that will be tested. Must know which
- C. BIG-IP services that are running on the system to be tested.
- D. BIG-IP must know which function the program is going to test. Must know
- E. BIG-IP node or member the result are to be applied to. Must know all
Answer: A,E
NEW QUESTION 43
The following iRule is being used within a persistence profile on a virtual server. Assuming the following HTTP requests are made within the same timeout window, what is the maximum number of persistence records that will be created iRule: rule Persist_Universal { when HTTP_REQUEST { persist uie [findstr [HTTP::uri] "?" 8 3] } Requests:#1 http: I/www.test.com/input.html?testl 45ABR80 #2 http ://www.test.com/input .html?testl 35PDC72 #3 http :llwww.test. com/input.html?testl 25ABR76 #4 http ://www.test.com/input.html?testl
45MN088 #5 http ://www.test. com/input.html?testl 55ABR98 #6 http ://www.test.com/input.html?testl 45 PDC6O #7 http ://www.test. com/input.html?testl 75ABC50 #8 http ://www.test.com/input.html?testl 25MN055 #9 http: llwww.test. com/input.html?testl 45ABC70 #10 http ://www.test.com/input.html?testl 35PDC42
- A. 0
- B. 1
- C. 2
- D. 3
- E. It cannot be determined from the given data.
- F. 4
- G. 5
Answer: A
NEW QUESTION 44
......
Topics in 301a - LTM Technology Specialist
The accompanying will be examined in F5 301 practice exam and F5 301 practice tests:
- F5 Architecture
Free F5 Networks Certification Study Materials 301 Exam Question: https://www.pass4surequiz.com/301-exam-quiz.html
Dumps Practice Exam Questions Study Guide for the 301 Exam: https://drive.google.com/open?id=1lojiwUZlY5UPKttNBxaPpbH_uCBeqKTY