2021 Valid JN0-230 Real Exam Questions (Updated) 100% Dumps & Practice Exam
[UPDATED 2021] Juniper JN0-230 Questions Prepare with Free Demo of PDF
Difficulty in writing JN0-362 Exam
Candidates already have experience and are networking professionals with beginner to intermediate knowledge with switching and routing experience so it is not difficult to pass the certifications. JN0-362 dumps and JN0-362 practice exams to revise the already discussed syllabus.
NEW QUESTION 28
Which statements is correct about SKY ATP?
- A. Sky ATP only support sending threat feeds to vSRX Series devices
- B. Sky ATP is a cloud-based security threat analyzer that performs multiple tasks
- C. Sky ATP is an open-source security solution.
- D. Sky ATP is used to automatically push out changes to the AppSecure suite.
Answer: A
NEW QUESTION 29
Which method do VPNs use to prevent outside parties from viewing packet in clear text?
- A. Authentication
- B. Integrity
- C. NAT_T
- D. Encryption
Answer: D
NEW QUESTION 30
Which two statements are correct about functional zones? (Choose two.)
- A. A function is used for special purpose, such as management interface
- B. Traffic received on the management interface in the functional zone cannot transit out other interface.
- C. Functional zones separate groups of users based on their function.
- D. A functional zone uses security policies to enforce rules for transit traffic.
Answer: A,B
NEW QUESTION 31
Click the Exhibit button
You have configured source ... Being received By the SRX series Which features must be configured
- A. Reverse static NAT
- B. Proxy ARP
- C. Port Forwarding
- D. Destination NAT
Answer: B
NEW QUESTION 32
On an SRX Series device, how should you configure your IKE gateway if the remote endpoint is a branch office-using a dynamic IP address?
- A. Configure the IPsec policy to use MDS authentication.
- B. Configure the IKE policy to use a static IP address
- C. Configure the IPsec policy to use aggressive mode.
- D. Configure the IKE policy to use aggressive mode.
Answer: D
NEW QUESTION 33
You are configuring an IPsec VPN tunnel between two location on your network. Each packet must be encrypted and authenticated.
Which protocol would satisfy these requirements?
- A. SHA
- B. AH
- C. ESP
- D. MD5
Answer: C
NEW QUESTION 34
Exhibit.
Which two statements are true? (Choose two.)
- A. Traffic static for this security policy are not generated.
- B. Logs for this security policy are not generated.
- C. Logs for this security policy are generated.
- D. Traffic statistics for this security policy are generated.
Answer: C,D
NEW QUESTION 35
Users in your network are downloading files with file extensions that you consider to be unsafe for your network. You must prevent files with specific file extensions from entering your network.
Which UTM feature should be enable on an SRX Series device to accomplish this task?
- A. URL filtering
- B. Content filtering
- C. Web filtering
- D. Antispam
Answer: B
NEW QUESTION 36
What does IPsec use to negotiate encryption algorithms?
- A. AH
- B. IKE
- C. ESP
- D. TLS
Answer: C
NEW QUESTION 37
Which security object defines a source or destination IP address that is used for an employee Workstation?
- A. Screen
- B. Address book entry
- C. Zone
- D. scheduler
Answer: B
NEW QUESTION 38
Which statements is correct about global security policies?
- A. Global policies allow you to regulate traffic with addresses and applications, regardless of their security zones.
- B. Global policies eliminate the need to assign interface to security zones.
- C. Global security require you to identify a source and destination zone.
- D. Traffic matching global is not added to the session table.
Answer: A
NEW QUESTION 39
Which two statements describe IPsec VPNs? (Choose two.)
- A. IPsec VPNs are dedicated physical connections between two private networks.
- B. IPsec VPN traffic is always encrypted.
- C. IPsec VPNs use security measures to secure traffic over a public network between two remote sites.
- D. IPsec VPN traffic is always authenticated.
Answer: C,D
NEW QUESTION 40
Which two notifications are available when the antivirus engine detects and infected file? (Choose two.)
- A. e-mail notifications
- B. Protocol-only notification
- C. SMS notifications
- D. SNMP notifications
Answer: C,D
NEW QUESTION 41
What is the correct order of processing when configuring NAT rules and security policies?
- A. Static NAT > destination NAT> policy lookup > source NAT
- B. Policy lookup > source NAT > static NAT > destination NAT
- C. Destination NAT> policy lookup > source NAT> static NAT
- D. Source NAT > static NAT > destination NAT > policy lookup
Answer: B
NEW QUESTION 42
Users on the network are restricted from accessing Facebook, however, a recent examination of the logs show that users are accessing Facebook.
Referring to the exhibit,
Why is this problem happening?
- A. The internet-Access rule has a higher precedence value
- B. Global rules are honored before zone-based rules.
- C. Zone-based rules are honored before global rules
- D. The internet-Access rule is listed first
Answer: C
NEW QUESTION 43
Which statements about NAT are correct? (Choose two.)
- A. Source NAT translates the source port and destination IP address.
- B. When multiple NAT rules have overlapping match conditions, the most specific rule is chosen.
- C. Source NAT translates the source IP address of packet.
- D. When multiple NAT rules have overlapping match conditions, the rule listed first is chosen.
Answer: C,D
NEW QUESTION 44
On an SRX Series device, how should you configure your IKE gateway if the remote endpoint is a branch office-using a dynamicIP address?
- A. Configure the IKE policy to use a static IP address
- B. Configure the IKE policy to use aggressive mode.
- C. Configure the IPsec policy to use aggressive mode.
- D. Configure the IPsec policy to use MDS authentication.
Answer: D
NEW QUESTION 45
Exhibit.
Which two statements are true? (Choose two.)
- A. Logs for this security policy are not generated.
- B. Traffic static for this security policy are not generated.
- C. Traffic statistics for this security policy are generated.
- D. Logs for this security policy are generated.
Answer: B,D
NEW QUESTION 46
On an SRX Series device, how should you configure your IKE gateway if the remote endpoint is a branch office using a dynamic IP address?
- A. Configure the IPsec policy to use MD5 authentication.
- B. Configure the IPsec policy to use aggressive mode.
- C. Configure the IKE policy to use a static IP address.
- D. Configure the IKE policy to use aggressive mode.
Answer: D
NEW QUESTION 47
You are configuring an IPsec VPN tunnel between two location onyour network. Each packet must be encrypted and authenticated.
Which protocol would satisfy these requirements?
- A. SHA
- B. ESP
- C. AH
- D. MD5
Answer: C
NEW QUESTION 48
Which statements about NAT are correct? (Choose two.)
- A. When multiple NAT rules have overlapping match conditions, the most specific rule is chosen.
- B. Source NAT translates the source port and destination IP address.
- C. When multiple NAT rules have overlapping match conditions, the rule listed first is chosen.
- D. Source NAT translates the source IP address of packet.
Answer: A,C
NEW QUESTION 49
......
Additional Materials: Focus on Revision Book
Here’s the best revision book to help you prepare for the Juniper JN0-230 exam:
JNCIA Study Guide
The JNCIA: Juniper Networks Certified Internet Associate study guide from Amazon is one of the best revision books you can use for your certification exam prep. Written by renowned IT leaders, Joseph M. Soricelli, John L. Hammond, and others, this guide gives painstaking details about the certification exam in a fulfilling way. It covers the essential test objectives ranging from the Junos software to firewall filters, and troubleshooting skills. Aside from giving in-depth coverage of the test objectives, this book also features hundreds of exciting practice test questions to help you dedicate enough time to the learning objectives.
JN0-230 Deluxe Study Guide with Online Test Engine: https://www.pass4surequiz.com/JN0-230-exam-quiz.html