Exam Dumps 350-501 Practice Free Latest Cisco Practice Tests
350-501 Exam Questions | Real 350-501 Practice Dumps
NEW QUESTION # 204
What is a characteristic of prefix segment identifier?
- A. It contains a router to a neighbor
- B. It contains the interface address of the device per each link
- C. It is locally unique.
- D. It is globally unique.
Answer: D
NEW QUESTION # 205
You are writing an RPL script to accept routes only from certain autonomous systems Consider this code.
If you apply this code to BGP filters, which effect does the code have on your router?
- A. allows routes from AS 7077
- B. denies routes from AS 7070
- C. denies routes from AS 7007
- D. allows routes from AS 770
Answer: A
NEW QUESTION # 206
An engineer began to configure LDP between R1 and R2, but R1 and R2 cannot yet establish an LDP TCP connection.
Which additional task must be completed to finish the implementation?
- A. Configure the mpls Idp neighbor 172.16.0.1 password command on R1
- B. Configure the mpls Idp neighbor 10.0.12.1 password command on R1
- C. Configure the no mpls Idp password option 1 command on R2
- D. Configure the no mpls Idp password option 1 command on R1
Answer: A
NEW QUESTION # 207
Which characteristic describes prefix segment identifier?
- A. it contains the interface address of the device per each link.
- B. it is locally unique.
- C. It contains a router to a neighbor.
- D. It Is globally unique.
Answer: D
NEW QUESTION # 208
An engineer must extend Layer 2 Between two campus sites connected through an MPLS backbone that encapsulates Layer 2 and Layer 3 data.
Which action must the engineer perform on the routers to accomplish this task?
- A. Configure a pseudowire for E-LINE.
- B. Configure Cisco MPLS TE for use with E-TREE.
- C. Configure QoS for MPLS and E-ACCESS
- D. Configure a EtherChannel for E-LAN.
Answer: A
NEW QUESTION # 209
Refer to the exhibit.
A network operator working for a telecommunication company with an employee 3994:37:650 is implementing a cisco Unified MPLS solution. What is the effect of this implementation?
- A. IS-IS is deployed between the PEs and ABRs with RFC 3107.
- B. OSPF is deployed between the PEs and ABRs with RFC 3107.
- C. BGP is deployed between the PEs and ABRs with RFC 3107.
- D. EIGRP is deployed between the PEs and ABRs with RFC 3107.
Answer: C
Explanation:
NEW QUESTION # 210
Drag and Drop Question
Drag and drop the multicast concepts from the left onto the correct description on the right.
Answer:
Explanation:
NEW QUESTION # 211
Refer to the exhibit:
Router 1 was experiencing a DDoS attack that was traced to interface gjgabitethernet0/1.
Which statement about this configuration is true?
- A. Router 1 accepts source addresses that have a match in the FIB that indicates it is reachable through a real interface
- B. Router 1 drops all traffic that ingresses interface gigabitethernet0/1 that has a FIB entry that exits a different interface
- C. Router 1 accepts all traffic that ingresses and egresses interface gigabitethernet0/1
- D. Router 1 accepts source addresses on interface gigabitethemet0/1 that are private addresses
Answer: A
NEW QUESTION # 212
Refer to the exhibit.
An engineer has started to configure a router for secure remote access as shown. All users who require network access need to be authenticated by the SSH Protocol.Which two actions must the engineer implement to complete the SSH configuration? (Choose two.)
- A. Configure crypto keys
- B. Configure an IP domain name.
- C. Configure ACL 100 to permit access to port 22.
- D. Configure a password under the vty lines.
- E. Configure service password encryption.
Answer: A,B
NEW QUESTION # 213
Refer to the exhibit. A network operator working for a private telecommunication company with an employee id: 7138: 13:414 just added new users to the network, which resides in VLANs connected to routers R1 and R4. The engineer now must configure the network so that routers R1 and R4 share routes to the VLANs, but routers R2 and R3 are prevented from including the routes in their routing tables. Which configuration must the engineer apply to R4 to begin implementing the request?
- A. pseudowire -class ciscotest
encapsulation mpls
interface gigabitethernet 1/0/1
xconnect 192.168.1.1 101 pw-class ciscotest - B. pseudowire -class ciscotest
encapsulation mpls
interface gigabitethernet 1/0/1
connect neighbor 192.168.1.1 101 pw-class cisco - C. pseudowire-class ciscotest
encapsulation mpls
service-policy output ciscotest - D. interface serial 2/0/0
frame-relay encapsulation
ip address 192.168.1.4 255.255.255.0
service-policy output ciscotest
Answer: A
NEW QUESTION # 214
Refer to the exhibit. The operations team is implementing an LDP-based configuration in the service provider core network with these requirements:
- R1 must establish LDP peering with the loopback IP address as its
Router-ID.
- Session protection must be enabled on R2.
How must the team update the network configuration to successfully enable LDP peering between R1 and R2?
- A. Change the LDP password on R2 to Cisco.
- B. Configure LDP session protection on R1.
- C. Change the discover hello hold time and interval to their default values.
- D. Configure mpls ldp router-id loopback0 on R1 and R2.
Answer: D
NEW QUESTION # 215
Drag and drop the functions from the left onto the Path Computation Element Protocol roles on the right.
Answer:
Explanation:
NEW QUESTION # 216
Drag and drop the characteristics from the left onto the automation tool on the right.
Answer:
Explanation:
NEW QUESTION # 217
What is the function of the FEC filed within the OTN signal structure?
- A. It allows source nodes to discard payload errors before transmitting data on the network.
- B. It allows receivers to correct errors upon data arrival.
- C. It allows the sending devices to apply QoS within the OTN forwarding structure.
- D. It allows deep inspection of data payload fields.
Answer: B
NEW QUESTION # 218
Refer to the exhibit:
Which effect of this configuration is true?
- A. R1 can failover to any peer
- B. R1 can support a peer that is configured for LDP SSO/NSF as the peer recovers from an outage
- C. R1 can failover only to a peer that is configured for LDP SSO/NSF
- D. R1 can support a graceful restart operation on the peer, even if graceful restart is disabled on the peer
Answer: B
NEW QUESTION # 219
Refer to the exhibit:
What does the REST API command do?
- A. It displays the information identified by Descriptions xml
- B. It retrieves the information requested by Descriptions xml
- C. It removes the information identified by Descriptions xml
- D. It executes the commands specified in Descriptions xml
Answer: D
NEW QUESTION # 220
Refer to the exhibit. Which information is provided for traceback analysis when this configuration is applied?
- A. source interface
- B. IP sub flow cache
- C. packet size distribution
- D. BGP version
Answer: B
NEW QUESTION # 221
Refer to the exhibit. What is the URL used for with REST API?
- A. It is used to send a TACACS+ authentication request to a server
- B. It is used to send a message to the APIC to perform an operation on a managed object or class operator
- C. It is used to contact a URL filter to determine the efficacy of a web address
- D. It is used to initiate an FTP session to save a running configuration of a device.
Answer: B
NEW QUESTION # 222
After you analyze your network environment, you decide to implement a full separation model for Internet access and MPLS L3VPN services For which reason do you make this decision?
- A. It enables EGP and IGP to operate independently
- B. It is easier to manage a system in which services are mixed
- C. It enables you to choose whether to separate or centralize each individual service.
- D. It requires only one edge router
Answer: C
NEW QUESTION # 223
Refer to the exhibit:
Which effect of this configuration is true?
- A. R1 can failover to any peer
- B. R1 can support a peer that is configured for LDP SSO/NSF as the peer recovers from an outage
- C. R1 can failover only to a peer that is configured for LDP SSO/NSF
- D. R1 can support a graceful restart operation on the peer, even if graceful restart is disabled on the peer
Answer: C
NEW QUESTION # 224
Refer to the exhibit. An organization s network recently experienced several significant outages due to device failures. The network administrator just moved the network devices to a new central data center, and packets are switched using labels. The administrator Is now implementing NSF on the network to reduce potential risk factors in the event of another outage. Which task must the administrator perform on each router as part of the process?
- A. Implement Graceful Restart to mitigate the delay in MPLS LDP synchronization when the IGP starts up.
- B. Copy the router s existing state information and share the file with its peers to enable BGP soft resets
- C. Remove route filtering to speed repopulation of the link-state database
- D. Implement MPLS to forward packets while the RIB updates after a faliover.
Answer: A
NEW QUESTION # 225
......
Verified 350-501 Exam Dumps Q&As - Provide 350-501 with Correct Answers: https://www.pass4surequiz.com/350-501-exam-quiz.html
Pass Your 350-501 Dumps Free Latest Cisco Practice Tests: https://drive.google.com/open?id=1im85eSNIKO9i67YZVdpySR4xKHTBbUOT