[Jan 29, 2024] Passing Key To Getting HPE6-A73 Certified Exam Engine PDF
HPE6-A73 Exam Dumps Pass with Updated Jan-2024 Tests Dumps
HP HPE6-A73 exam consists of 60 multiple-choice questions that you must complete within 90 minutes. The passing score for HPE6-A73 exam is 70%, and you can take the exam at any Pearson VUE testing center worldwide. You can also take the exam online using Pearson OnVUE, which allows you to take the exam from the comfort of your home or office.
Aruba's switching solutions are widely used in various industries, including healthcare, education, hospitality, and retail. Therefore, the HPE6-A73 certification can benefit IT professionals working in these industries, as well as those interested in pursuing careers in network administration, technical support, and network engineering.
NEW QUESTION # 34
An administrator will be implementing tunneling between AOS-CX switches and Aruba gateways. Which list of protocols must minimally be allowed by an intermediate firewall between two sets of devices?
- A. UDP 4500 and UDP 8209
- B. UDP 8211 and IP protocol 47
- C. IP protocol 50 and UDP 8209
- D. UDP 4500 and IP protocol 47
Answer: D
NEW QUESTION # 35
An administrator will be implementing tunneling between AOS-CX switches and Aruba gateways. Which list of protocols must minimally be allowed by an intermediate firewall between two sets of devices?
- A. UDP 8211 and IP protocol 47
- B. UDP 4500 and UDP 8209
- C. UDP 4500 and IP protocol 47
- D. IP protocol 50 and UDP 8209
Answer: A
Explanation:
ACSP Study Guide Page 788 - Allow the following protocols/ports
- PAPI: UDP 8211
- GRE: Protocoll 47
NEW QUESTION # 36
A network administrator is implementing a configuration plan in NetEdit The administrator used NetEdit to push the configuration plan to the switch. Which option in the NetEdit planning section should the administrator select to save the configuration running on the switch to the startup-config?
- A. VALIDATE
- B. EDIT
- C. DEPLOY
- D. COMMIT
Answer: D
NEW QUESTION # 37
Examine the commands entered on an AOS-CX switch:
What is true regarding this configuration for traffic received on interface 100?
- A. The traffic is always dropped is the next-hop addresses are unreachable
- B. The next-hop address of 1.1.1.1 is overwritten by the next-hop address of 2.2.2.2
- C. The traffic will be routed with the IP routing table entries if the next-hop addresses are unreachable
- D. The default next-hop address supersedes the two preceding next-hop addresses
Answer: D
NEW QUESTION # 38
An administrator is implementing a downloadable user role solution involving AOS-CX switches. The AAA solution and the AOS-CX switches can successfully authenticate users; however, the role information fails to download to the switches. What policy should be added to an intermediate firewall to allow the downloadable role function to succeed?
- A. Allow TCP 22
- B. Allow UDP 1811
- C. Allow TCP 443
- D. Allow UDP 8211
Answer: C
Explanation:
pg 681 from the Aruba guide - "When using DUR, the ClearPass HPE-CPPM-Role VSA is used in combination with HTTPS to transfer the role to the switch." UDP 8211 (PAPI) is related to dynamic segmentation and the communication to the MC not DUR.
NEW QUESTION # 39
The network is configured for OSPF with the following attributes:
Core1 and Core2 and ABRs
Area 1 has 20 networks in the 10.1.0.0/16 range
Area 0 has 10 networks in the 10.0.0.0/16 range
Area 2 has 50 networks in the 10.2.0.0/16 range
The ASBR is importing a static route into Area 1
Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:
Based on the above information, what is correct?
- A. Area 1 has 23 routes
- B. Core1 has no OSPF routes
- C. Area 0 has 13 routes
- D. Core1 has received one LSA Type 5 from the ASBR
Answer: A
NEW QUESTION # 40
Which statement is correct regarding ACLs and TCAM usage?
- A. Applying an ACL to a group of VLANs consumes the same resources as specific ACE entries
- B. Using object groups consumes the same resources as specific ACE entries.
- C. Compression is automatically enabled for ASIC TCAMs on AOS-CX switches.
- D. Applying an ACL to a group of ports consumes the same resources as specific ACE entries
Answer: D
NEW QUESTION # 41
A company requires access by all users, guests, and employees to be authenticated. Employees will be authenticated using 802.1X, whereas guests will be authenticated using captive portal. Which type of authentication must be configured on an AOS-CX switch ports where both guests and employees connect?
- A. 802.1X, captive portal, and MAC-Auth
- B. Both 802.1X and MAC-Auth
- C. 802.1X only
- D. Both 802.1X and captive portal
Answer: B
NEW QUESTION # 42
MAC authentication is enabled on port 1/1/27 of an AOS-CX switch. The following MAC addresses are defined on the AAA server:
* 88:3a:30:97:b6:00
* 00:50:56:b1:fc:9b
Examine the AOS-CX switch output:
Based on this information, what is true concerning port 1/1/27?
- A. Device-mode is enabled with a client limit of 2.
- B. Client-mode is enabled with a client limit of 2.
- C. Device-mode is enabled with a client limit of 1.
- D. Client-mode is enabled with a client limit of 1.
Answer: D
Explanation:
https://www.arubanetworks.com/techdocs/AOS-CX/AOSCX-CLI-Bank/cli_6300-6400/Content/Chp_Port_acc/Port_acc_rol_cmds/aut-mod-fl-10.htm client-mode = Selects client mode. In this mode, all clients connecting to the port are sent for authentication.
device-mode = Selects device mode. In this mode, only the first client connecting to the port is sent for authentication. Once this client is authenticated, the port is considered as open and all subsequent clients trying to connect on that port are not sent for authentication.
NEW QUESTION # 43
Examine the partial output of the BGP routing table of an AOS-CX switch:
The switch is learning about four possible path to reach the 1.0.0.0/8 network. Based on this output, which next-hop route will the AOS-CX select to be placed in the IP routing table?
- A. 192 1684 5
- B. 192 168 2 5
- C. 192 168 3 5
- D. 192 168 1 5
Answer: C
NEW QUESTION # 44
Which concept is implemented using Aruba's dynamic segmentation?
- A. Device fingerprinting
- B. Colorless port
- C. Zero Touch Provisioning
- D. Root of trust
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION # 45
An administrator will be implementing tunneling between AOS-CX switches and Aruba gateways. Which list of protocols must minimally be allowed by an intermediate firewall between two sets of devices?
- A. UDP 8211 and IP protocol 47
- B. UDP 4500 and UDP 8209
- C. UDP 4500 and IP protocol 47
- D. IP protocol 50 and UDP 8209
Answer: A
Explanation:
ACSP Study Guide Page 788 - Allow the following protocols/ports
- PAPI: UDP 8211
- GRE: Protocoll 47
NEW QUESTION # 46
A company has just purchased AOS-CX switches. The company has a free and open-source AAA solution.
The company wants to implement access control on the Ethernet ports of the AOS-CX switches.
Which security features can the company implement given the equipment that they are using?
- A. Device fingerprinting
- B. Port-based tunneling
- C. Downloadable user roles
- D. Local user roles
Answer: D
NEW QUESTION # 47
When comparing PIM-DM and PIM-SM, which multicast components are only found with PIM-SM in multicast routing? (Choose two.)
- A. Shortest path tree
- B. Designated router
- C. Bootstrap router
- D. Rendezvous point
- E. IGMP querier
Answer: A,D
NEW QUESTION # 48
A network engineer for a company with 896 users across a multi-building campus wants to gather statistics on an important switch uplink and create actions based on issues that occur on the uplink. How often does an NAE agent gather information from the current state database in regard to the uplink interfaces?
- A. Once every 60 seconds
- B. Once every 30 seconds
- C. Once every 1 second
- D. Once every 5 seconds
Answer: A
NEW QUESTION # 49
A company has an existing wireless solution involving Aruba APs and Mobility controllers running 8.4 code.
The solution leverages a third-party AAA solution. The company is replacing existing access switches with AOS-CX 6300 and 6400 switches. The company wants to leverage the same security and firewall policies for both wired and wireless traffic.
Which solution should the company implement?
- A. User-based tunneling
- B. RADIUS dynamic authorization
- C. IPSec
- D. Downloadable user roles
Answer: A
NEW QUESTION # 50
A company has recently upgraded their campus switching infrastructure with AOS-CX switches. They have implemented 802.1X authentication on access ports where laptop and IOT devices typically connect. An administrator has noticed that for POE devices, the AOS-CX switch ports are delivering the maximum wattage to the port instead of what the device actually needs.
Concerned about this waste of electricity, what should the administrator implement to solve this problem?
- A. Implement a classifier policy with the correct power definitions
- B. Create device profiles with the correct power definitions.
- C. Enable AAA authentication to exempt LLDP and/or CDP information.
- D. Globally enable the QoS trust setting for LLDP and/or CDP,
Answer: B
NEW QUESTION # 51
In AOS-CX switching, what determines when a frame is forwarded by the switch between the ingress and the egress port?
- A. Fabric Load Balancer
- B. Ingress port
- C. Egress port
- D. VSX switch tables
Answer: B
NEW QUESTION # 52
A network engineer is using NetEdit to manage AOS-CX switches. The engineer notices that a lot of thirdparty VoIP phones are showing up in the NetEdit topology. The engineer deletes these, but they are automatically rediscovered by NetEdit and added back in.
What should the administrator do to solve this problem?
- A. Disable the RESTful API on all the VoIP phones
- B. Disable SSH access on all the VoIP phones
- C. Disable LLDP globally on the AOS-CX switches where phones are connected
- D. Change the VoIP phone SNMP community string to something unknown by NetEdit
Answer: D
Explanation:
"NetEdit will now algo discover and display third-party devices that are using the stantard MIB's. Using SNMP with NetEDit, administrators can also enter SSH credentials for third-party devices.
NEW QUESTION # 53
Examine the network exhibit:
The ACL configuration defined on Core-1 is as follows:
If telnet was being used, which device connection would be permitted and functional in both directions?
(Choose two.)
- A. Server 1 to Client 1
- B. Server 2 to Client 2
- C. Client 1 to Client 2
- D. Client 1 to Client 3
- E. Client 3 to Client 2
Answer: C,D
NEW QUESTION # 54
A company has just purchased AOS-CX switches. The company has a free and open-source AAA solution.
The company wants to implement access control on the Ethernet ports of the AOS-CX switches.
Which security features can the company implement given the equipment that they are using?
- A. Device fingerprinting
- B. Downloadable user roles
- C. Local user roles
- D. Port-based tunneling
Answer: B
NEW QUESTION # 55
A company is implementing a new wireless design and needs it to support high availability, even during times of switch system upgrades. The solution will involve Aruba Mobility Controller (MC) and Aruba AP connections requiring POE. Which campus AOS-CX switch solution and virtual switching should the company implement at the campus access layer?
- A. AOS-CX 6400 and VSX
- B. AOS-CX 6300 and VSF
- C. AOS-CX 8400 and VSX
- D. AOS-CX 8325 and VSF
Answer: A
Explanation:
only 6400 support highly available during upgrades
NEW QUESTION # 56
......
HPE6-A73 certification exam is an industry-recognized certification offered by HP that evaluates an individual's expertise in Aruba switching technologies. HPE6-A73 exam is designed to test the skills and knowledge of IT professionals in configuring, deploying, and managing Aruba switches in complex networks. Aruba Certified Switching Professional Exam certification is designed for network administrators, engineers, and consultants who are responsible for implementing and managing Aruba switching solutions in enterprise environments.
HPE6-A73 exam questions for practice in 2024 Updated 124 Questions: https://www.pass4surequiz.com/HPE6-A73-exam-quiz.html
Updated Premium HPE6-A73 Exam Engine pdf: https://drive.google.com/open?id=1lQUAPmaYwD_lA_zX8nq9eRo8mQggZ03U