The Realest Study Materials HPE6-A73 Dumps Updated Feb 08, 2023 [Q63-Q88]

Share

The Realest Study Materials HPE6-A73 Dumps  Updated  Feb 08, 2023

LATEST HPE6-A73 Exam Practice Material

NEW QUESTION 63
Examine the attached diagram

Two AOS-CX switches are configured for VSX at the access layer, where servers attached to them. An SVI interface is configured for VLAN 10 and serves as the default gateway for VLAN 10. The ISL link between the switches fails, but the keepalive interface functions. Active gateway has been configured on the switches.
What is correct about access from the servers to the Core?

  • A. Server 2 can successfully access the core layer via the keepalive link.
  • B. Server 1 can access the core layer via both uplinks.
  • C. Server 1 and Server 2 can communicate with each other via the core layer.
  • D. Server 2 cannot access the core layer.

Answer: C

 

NEW QUESTION 64
An administrator creates an ACL rule with both the "count" and "log" option enabled. What is correct about the action taken by an AOS-CX switch when there is a match on this rule?

  • A. By default, a summarized log is created every minute with a count of the number of matches
  • B. Logging will not include certificate and TLS events, but counting will
  • C. The "count" and "log" options are processed by the AOS-CX switch's hardware ASIC
  • D. The total in the "log" record and the count could contain different rule matching statistics

Answer: D

Explanation:
From the "AOS-CX 10.08 ACLs and Classifier Policies Guide" : "You may see a minor discrepancy between the ACL logging statistics and the hit counts statistics due to the time required to record the log message."

 

NEW QUESTION 65
What would prevent two OSPF routers from forming an adjacency? (Select two.)

  • A. Different MTU sizes
  • B. Different IP addresses
  • C. Different priorities
  • D. Different router IDs
  • E. Different area types

Answer: A,E

 

NEW QUESTION 66
A company has implemented 802.1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA.
Each switch has the two servers defined. A network engineer notices the following command configured on the AOS-CX switches:
radius-server tracking user-name monitor password plaintext aruba123
What is the purpose of this configuration?

  • A. Define the account to implement downloadable user roles
  • B. Implement replay protection for AAA messages
  • C. Speed up the AAA authentication process
  • D. Define the account to implement change of authorization

Answer: C

Explanation:
Radius service tracking locates the availability of the RADIUS service configured on the switch. It helps to minimize the waiting period for new clients in the unauth-vid (Guest Vlan) when authentication fails because of service is not available, as well as previously authenticated clients in unauth-vid (Guest Vlan) when re-authentication fails because service is not available during the re-authentication period. Note that this feature is disabled by default.
https://techhub.hpe.com/eginfolib/networking/docs/switches/WB/16-02/5200-1650_WB_ASG/content/ch04s04.html

 

NEW QUESTION 67
An administrator is implementing a downloadable user role solution involving AOS-CX switches. The AAA solution and theAOS-CX switches can successfully authenticate users: however the role information fails todownload to the switches. Whatpolicy should be added to an intermediate firewall to allow the downloadable role function to succeed?

  • A. Allow UDP 1811
  • B. Allow TCP 443
  • C. Allow TCP 22
  • D. Allow UDP 8211

Answer: B

 

NEW QUESTION 68
A company has just purchased AOS-CX switches. The company has a free and open-source AAA solution.
The company wants to implement access control on the Ethernet ports of the AOS-CX switches.
Which security features can the company implement given the equipment that they are using?

  • A. Device fingerprinting
  • B. Downloadable user roles
  • C. Port-based tunneling
  • D. Local user roles

Answer: D

 

NEW QUESTION 69
The network is configured for OSPF with the following attributes:
Core1 and Core2 and ABRs
Area 1 has 20 networks in the 10.1.0.0/16 range
Area 0 has 10 networks in the 10.0.0.0/16 range
Area 2 has 50 networks in the 10.2.0.0/16 range
The ASBR is importing a static route into Area 1
Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:

Based on the above information, what is correct?

  • A. Core1 has received one LSA Type 5 from the ASBR
  • B. Core1 has no OSPF routes
  • C. Area 1 has 23 routes
  • D. Area 0 has 13 routes

Answer: C

 

NEW QUESTION 70
When comparing PIM-DM and PIM-SM, which multicast components are only found with PIM-SM in multicast routing? (Choose two.)

  • A. Designated router
  • B. Shortest path tree
  • C. IGMP querier
  • D. Bootstrap router
  • E. Rendezvous point

Answer: B,E

 

NEW QUESTION 71
An administrator is designing an access layer solution in a data center. A key requirement is to dual-home mission-critical server connections to two different switches, ensuring that the servers always have network access, even during switch software upgrades. This feature should support strictly-controlled provisioning.
What would best meet the administrator's needs when deploying AOS-CX switches?

  • A. NAE
  • B. VSF
  • C. VSX
  • D. Dynamic segmentation

Answer: C

 

NEW QUESTION 72
What must a network administrator implement in order to run an NAE script on an AOS-CX switch?

  • A. Schedule
  • B. Plan
  • C. Agent
  • D. Deployment

Answer: C

 

NEW QUESTION 73
Examine the following ACL rule policies:
Permit traffic from 10.2.2.1 through 10.2.2.30 to anywhere
Permit traffic from 10.2.2.40 through 10.2.2.55 to anywhere
Deny all others
Based on this policy, place the following ACL rule statements in the correct order to accomplish the above filtering policy.

  • A. deny ip 10.2.2.31 255.255.255.255 any
    deny ip 10.2.2.32 255.255.255.224 any
    permit ip 10.2.2.40 255.255.255.248 any
    permit ip 10.2.2.48 255.255.255.248 any
    permit ip 10.2.2.0 255.255.255.192 any
  • B. deny ip 10.2.2.31 255.255.255.255 any
    permit ip 10.2.2.40 255.255.255.248 any
    permit ip 10.2.2.48 255.255.255.248 any
    deny ip 10.2.2.32 255.255.255.224 any
    permit ip 10.2.2.0 255.255.255.192 any
  • C. deny ip 10.2.2.31 255.255.255.255 any
    permit ip 10.2.2.40 255.255.255.248 any
    deny ip 10.2.2.32 255.255.255.224 any
    permit ip 10.2.2.48 255.255.255.248 any
    permit ip 10.2.2.0 255.255.255.192 any
  • D. permit ip 10.2.2.40 255.255.255.248 any
    permit ip 10.2.2.48 255.255.255.248 any
    permit ip 10.2.2.0 255.255.255.192 any
    deny ip 10.2.2.31 255.255.255.255 any
    deny ip 10.2.2.32 255.255.255.224 any

Answer: B

 

NEW QUESTION 74
An administrator is managing a VSX pair of AOS-CX switches An administrator configures the following on the primary AOS-CX switch:

  • A. The operation is not allowed by the switch and a CLI error is displayed
  • B. The VLAN is created on both the primary and secondary switches
  • C. The VLAN is only created on the secondary switch.
  • D. The primary switch will erase VLAN 200 from the VSX pair

Answer: B

 

NEW QUESTION 75
How is NetEdit installed at a customer location?

  • A. Via an Aruba NetEdit hardware appliance
  • B. Via a DVD using a virtualized platform like Microsoft's Hyper-V
  • C. Via me Aruba Central cloud solution
  • D. Via an OVA file and a virtualized platform like VMware's ESXi

Answer: D

 

NEW QUESTION 76
Examine the configuration performed on newly deployed AOS-CX switches;

After performing this configuration the administrator notices that the switch ports always remain in the EAP-start state. What should the administrator do to fix this problem?

  • A. Enable change of authorization (CoA)
  • B. Define the server group cppm
  • C. Create and assign a local user role to the ports.
  • D. Set the ports to client-mode.

Answer: B

 

NEW QUESTION 77
A network engineer is using NetEdit to manage AOS-CX switches. The engineer notices that a lot of thirdparty VoIP phones are showing up in the NetEdit topology. The engineer deletes these, but they are automatically rediscovered by NetEdit and added back in.
What should the administrator do to solve this problem?

  • A. Disable LLDP globally on the AOS-CX switches where phones are connected
  • B. Disable SSH access on all the VoIP phones
  • C. Change the VoIP phone SNMP community string to something unknown by NetEdit
  • D. Disable the RESTful API on all the VoIP phones

Answer: C

Explanation:
"NetEdit will now algo discover and display third-party devices that are using the stantard MIB's. Using SNMP with NetEDit, administrators can also enter SSH credentials for third-party devices.

 

NEW QUESTION 78
A network administrator wants to centralize the management of AOS-CX switches by implementing NetEdit How should theadministrator purchase and/or install the NetEdit solution?

  • A. Installed in a virtualized solution by usung the Aruba-supplied OVA file
  • B. Install as a hardware appliance
  • C. Installed on a supported version of Debian Linux
  • D. Installed on a supported version of RedHat Enterprise Linux

Answer: A

 

NEW QUESTION 79
Examine the network topology.

Company XYZ has two connections to a service provider (ISP1). Here is the configuration of Router1:

Here is the configuration of Router2:

Based on configuration of Router1 and Router2, which BGP metric is being manipulated?

  • A. AS path length
  • B. Multiple exit discriminator
  • C. Weight
  • D. Local preference

Answer: B

 

NEW QUESTION 80
Examine the network exhibit.

A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?

  • A. User-based tunneling (UBT)
  • B. OSPF route maps using the "set metric" command
  • C. Classifier policies
  • D. Policy-based routing (PBR)

Answer: D

 

NEW QUESTION 81
What is correct regarding policy-based routing?

  • A. Policy actions include routing permitting or dropping traffic.
  • B. Policies can only be applied to routed interfaces.
  • C. Monitoring of policy interfaces occurs every 60 seconds.
  • D. Policies can be applied inbound and outbound.

Answer: B

 

NEW QUESTION 82
An administrator of a company has concerns about upgrading the access layer switches. The users rely heavily on wireless and VoIP telephony. Which is the best recommendation to ensure a short downtime for the users during upgrading the access layer switches?

  • A. Install AOS-CX 6300 or 6400 switches with always-on POE
  • B. Implement VSF on the AOS-CX access switches
  • C. Install the in-service software upgrade (ISSU) feature with clustering enabled
  • D. Implement VSX on the AOS-CX access switches

Answer: A

Explanation:
The key is to reduce the impact. VSF or not will have same impact when the switch reboots. But if the switch support always on poe then at least the POE clients will be ready before the switch finish booting up. If you dont have always on POE, then the poe clients will reboot AFTER the switch boots up.

 

NEW QUESTION 83
Examine the network exhibit.

A company has a guest implementation for wireless and wired access Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic.
The network administrator has established a GRE tunnel between AOS-CX switcheswhere guests are connected to arouting switch in the DMZ Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?

  • A. User-based tunneling (UBT)
  • B. OSPF route maps using the "set metric" command
  • C. Classifier policies
  • D. Policy-based routing (PBR)

Answer: D

 

NEW QUESTION 84
An administrator wants to leverage always-on PoE on AOS-CX switches. Which statement is correct regarding this feature'?

  • A. Provides surge protection for PoE and non-PoE ports
  • B. Provides up to 60W of power per port
  • C. Supports all AOS-CX switches
  • D. Requires NetEdit to implement

Answer: B

 

NEW QUESTION 85
Examine the commands entered on an AOS-CX switch:
What is true regarding this configuration for traffic received on interface 100?

  • A. The default next-hop address supersedes the two preceding next-hop addresses
  • B. The next-hop address of 1.1.1.1 is overwritten by the next-hop address of 2.2.2.2
  • C. The traffic will be routed with the IP routing table entries if the next-hop addresses are unreachable
  • D. The traffic is always dropped is the next-hop addresses are unreachable

Answer: A

 

NEW QUESTION 86
What is correct regarding the tunneling of user traffic between AOS-CX switches and Aruba Mobility Controllers (MCs)?

  • A. Uses IPSec to protect the management traffic
  • B. Supports only port-based tunneling
  • C. Uses the same management protocol as Aruba APs
  • D. Uses iPSec to protect the management and data traffic

Answer: C

 

NEW QUESTION 87
Examine the attached diagram.

The two PCs are located in VLAN 11 (10.1.11.0/24). Which example defines how to implement active gateway on the VSX core for VLAN 11?

  • A. interface vlan 11
    active-gateway ip 10.1.11.1
    active-gateway mac 02:02:00:00:01:00
  • B. interface lag 254
    active-gateway vlan 11 ip 10.1.11.1
    active-gateway vlan 11 mac 02:02:00:00:01:00
  • C. interface lag 254
    active-gateway ip 10.1.11.1
    active-gateway mac 02:02:00:00:01:00
  • D. vsx
    vrrp group 1

Answer: A

 

NEW QUESTION 88
......


Difficulty in Attempting Implementing Cisco Application Centric Infrastructure - Advanced (300 - 630) Exam

Our specialists have created the best quality exam dumps for all specialists who need to pass the exam the first time. The success of all our clients speaks for us and we are very proud to have the greatest success rate. All of our clients have used our exam preparation stuff for various certification exams and passed the actual exam after using our practice test software and answers to exam questions. If you need help, you can always contact our technical support team so we can assist you to solve your issues.

Certification-question.com gives various services, as we always provide 100% successful results for applicants with our practice exams super preparation product that also explains strategies on how to practice these tricks.

You can pass the certification exam, as we offer a 100% guarantee for your success. You are required to choose Pass4SureQuiz and you can simply get it from this site, our exam dumps will provide you with full assistance for your crossing point.

The practice exams of the HP Scalable WLAN Design and Implementation SWDI 8 (HPE6-A44) were developed with a vision that allows you to discover the real exam scenario before taking the actual exam. These intuitive design tests present a replica of the actual Salesforce exam, with exactly the same number of questions you can find on the Marketing-Cloud-Developer exam. Taking these tests means preparing a command on the actual exam format and reviewing and understanding the different exam topics.

Three to five days after you complete all requirements, you receive an email notification. Then your status in The Learning Center becomes “acquired”.

If you renewed this certification through a recertification path, you will also recertify any lower level certifications you achieved within the same domain. Example: Renewal of ACMX will renew ACMP and ACMA. All renewed certifications from the one renewal path will have the same new expiration date.

If you renewed this certification by completing the Edge certification or the Edge recertification path at any level (Associate/Professional/Expert), this will renew all certifications you achieved at that same level and any lower levels you have achieved. Example: ACEP renews ACMP, ACSP, ACCP, ACDP etc. and any Associate level you already achieved. All renewed certifications from the Edge certification or recertification path will have the same new expiration date.

Our HP HPE6-A73 practice exam and HP HPE6-A73 practice exams is best-suited to busy professionals who don't have much to spend on preparation and want to pass it in a week. Our Configuring Hewlett Packard Enterprise GreenLake Solutions HP practice exam has been duly prepared by the team of experts after an in-depth analysis of Cisco recommended syllabus. We update our material regularly. So, it is intended to keep candidates updated because as and when Cisco will announce any changes in the material; we will update the material right away. After practicing with our HP HPE6-A73 practice exam and HP HPE6-A73 practice exams, any candidate can pass Hewlett Packard Enterprise Aruba Certified Switching Professional Exam with good grades.

 

Study HIGH Quality HPE6-A73 Free Study Guides and Exams Tutorials: https://www.pass4surequiz.com/HPE6-A73-exam-quiz.html

New HPE6-A73 Actual Exam Dumps,  HP Practice Test: https://drive.google.com/open?id=1N48CxMkpEJh2y9DPEhjd-4sXq6PkogqE