Pass HPE6-A73 Exam in First Attempt Guaranteed 100% Cover Real Exam Questions [Dec-2021]
Valid HPE6-A73 test answers & HP HPE6-A73 exam pdf
NEW QUESTION 14
A network engineer for a company with 896 users across a multi-building campus wants to gather statistics on an important switch uplink and create actions based on issues that occur on the uplink. How often does an NAE agent gather information from the current state database in regard to the uplink interfaces?
- A. Once every 5 seconds
- B. Once every 30 seconds
- C. Once every 60 seconds
- D. Once every 1 second
Answer: C
NEW QUESTION 15
A network administrator needs to replace an antiquated access layer solution with a modular solution involving AOS-CX switches. The administrator wants to leverage virtual switching technologies. The solution needs to support high-availability with dual-control planes.
Which solution should the administrator implement?
- A. AOS-CX 6300
- B. AOS-CX 8325
- C. AOS-CX 8400
- D. AOS-CX 6400
Answer: D
Explanation:
Reference:
https://andovercg.com/datasheets/aruba-cx-8325-switch-series.pdf
NEW QUESTION 16
How is voice traffic prioritized correctly on AOS-CX switches?
- A. By defining device profiles with QOS settings
- B. By placing it in the strict priority queue
- C. By implementing weighted fair queueing (WFQ)
- D. By implementing voice VLANs
Answer: D
NEW QUESTION 17
Examine the network exhibit:
The ACL configuration defined on Core-1 is as follows:
If telnet was being used, which device connection would be permitted and functional in both directions?
(Choose two.)
- A. Server 2 to Client 2
- B. Client 1 to Client 3
- C. Client 3 to Client 2
- D. Server 1 to Client 1
- E. Client 1 to Client 2
Answer: B,E
NEW QUESTION 18
An administrator is defining a VSX LAG on a pair of AOS-CX switches that are defined as primary and secondary. The VSX LAG fails to establish successfully with a remote switch; however, after verification, the remote switch is configured correctly. The administrator narrows down the problem to the configuration on the AOS-CX switches.
What would cause this problem?
- A. The VSX LAG hash does not match the remote peer
- B. Local optimization was not enabled on the VSX LAG
- C. The VSX LAG interfaces are in layer-3 mode
- D. LACP was enabled in active mode on the VSX LAG
Answer: A
NEW QUESTION 19
Examine the output from an AOS-CX switch implementing a dynamic segmentation solution involving downloadable user roles:
The downloadable user roles are not being downloaded to the AOS-CX switch Based on the above output , what is the problem?
- A. The certificate that ClearPass uses is invalid
- B. The AOS-CX swicth does not have the ClearPass certificate involved.
- C. There is a date/time issue between the ClearPass server and the switch.
- D. DNS fails to resolve the ClearPass servers FQDN.
Answer: D
NEW QUESTION 20
An administrator is replacing the current access switches with AOS-CX switches. The access layer switches must authenticate user and networking devices connecting to them. Some devices support no form of authentication, and some support 802.1X. Some ports have a VoIP phone and a PC connected to the same port, where the PC is connected to the data port of the phone and the phone's LAN port is connected to the switch.
Which statement is correct about this situation?
- A. 802.1X must be configured to work in fallback mode
- B. The client-limit setting for port access needs to be changed
- C. Device mode should be implemented
- D. Device fingerprinting is required for authentication
Answer: B
NEW QUESTION 21
How js voice traffic prioritized correctly on AOS-CX switches'?
- A. By defining device profiles with QOS settings
- B. By placing tt in the strict priority queue
- C. By implementing weighted fair queueing (WFQ)
- D. By implementing voice VLANs
Answer: D
NEW QUESTION 22
An administrator has configured the following on an AOS-CX switch:
What is the correct ACL rule configuration that would allow traffic from anywhere to reach the web ports on the two specified servers?
- A. access-list ip server 10 permit tcp any web-servers group web-ports
- B. access-list ip server 10 permit tcp any group web-servers group web-ports
- C. access-list ip server 10 permit tcp any object-group web-servers object-group web-ports
- D. access-list ip server 10 permit tcp any web-servers web-ports
Answer: A
NEW QUESTION 23
The two PCs are located in VLAN 11 (10 1 11 0/24} Which example defines how to implement active gateway on the vsx core for VLAN 11?
A)
B)
C)
D)
- A. Option
- B. Option
- C. Option
- D. Option
Answer: C
NEW QUESTION 24
Examine the network exhibit:
The ACL configuration defined on Core-1 is as follows:
If telnet was being used, which device connection would be permitted and functional in both directions?
(Choose two.)
- A. Server 2 to Client 2
- B. Server 1 to Client 1
- C. Client 1 to Client 3
- D. Client 3 to Client 2
- E. Client 1 to Client 2
Answer: B,E
NEW QUESTION 25
Examine the network exhibit.
A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?
- A. User-based tunneling (UBT)
- B. Classifier policies
- C. OSPF route maps using the "set metric" command
- D. Policy-based routing (PBR)
Answer: D
NEW QUESTION 26
An administrator is defining a VSX LAG on a pair of AOS-CX switches that are defined as pnmary and secondary The VSX LAG fails to establish successfully with a remote switch; however, after verification, the remote switch is configured correctly. The administrator narrows down the problem to the configuration on the AOS-CX switches.
What would cause this problem?
- A. The VSX LAG hash does not match the remote peer
- B. Local optimization was not enabled on the VSX LAG
- C. The VSX LAG interfaces are in layer-3 mode
- D. LACP was enabled in active mode on the VSX LAG
Answer: A
NEW QUESTION 27
Examine the attached diagram.
The two PCs are located in VLAN 11 (10.1.11.0/24). Which example defines how to implement active gateway on the VSX core for VLAN 11?
- A. interface lag 254
active-gateway ip 10.1.11.1
active-gateway mac 02:02:00:00:01:00 - B. interface lag 254
active-gateway vlan 11 ip 10.1.11.1
active-gateway vlan 11 mac 02:02:00:00:01:00 - C. interface vlan 11
active-gateway ip 10.1.11.1
active-gateway mac 02:02:00:00:01:00 - D. vsx
vrrp group 1
Answer: C
NEW QUESTION 28
Examine the output from an AOS-CX switch implementing a dynamic segmentation solution involving downloadable user roles:
Switch# show port-access role clearpass
Role information:
Name : icxarubadur_employee-3044-2
Type : clearpass
Status: failed, parsing_failed
Reauthentication Period :
Authentication Mode :
Session Timeout :
The downloadable user roles are not being downloaded to the AOS-CX switch. Based on the above output, what is the problem?
- A. The AOS-CX switch does not have the ClearPass certificate involved
- B. DNS fails to resolve the ClearPass server's FQDN
- C. There is a date/time issue between the ClearPass server and the switch
- D. The certificate that ClearPass uses in invalid
Answer: B
NEW QUESTION 29
An administrator wants to drop traffic from VLAN 6 (10.1.6.0/24) to VLAN 5 (10.1.5.0/24), but allow all other traffic. What is correct configuration to accomplish this?
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: A
NEW QUESTION 30
A company uses NetEdit to manage a network of 700 AOS-CX switches and approximately 1,000 other SNMP-capable devices.
Which management solution should the company use to monitor all the devices, as well as see a topology picture of how all the devices are connected together?
- A. NetEdit
- B. Aruba AirWave
- C. Network Analysis Engine (NAE)
- D. Aruba Activate
Answer: A
NEW QUESTION 31
A network engineer is having a problem adding a custom-written script to an AOS-CX switch's NAE GUI.
The script was written in Python and was successfully added on other AOS-CX switches. The engineer examines the following items from the CLI of the switch:
What should the engineer perform to fix this issue?
- A. Remove a script that is no longer used before installing the new script
- B. Enable trust settings for the AOS-CX switch's SSL certificate
- C. Ensure the engineer's desktop and the AOS-CX switch are synchronized to the same NTP server
- D. Install the script's signature before installing the new script
Answer: A
NEW QUESTION 32
A company is implementing AOS-CX switches at the access layer. The company wants to implement access control for employees and guests.
Which security features will require a ClearPass server to be installed and used by the company?
- A. User-based tunneling (UBT)
- B. Change of authorization (CoA)
- C. Downloadable user roles
- D. Dynamic segmentation
Answer: D
NEW QUESTION 33
An administrator is supporting a network with the access layer consisting of AOS-CX 6300 and 6400 switches. The administrator needs to quickly deploy Aruba IAPs and security cameras in the network, ensuring that the correct QoS and VLAN settings are dynamically applied to the switch ports. Currently, switches are not configured to do device authentication, and no authentication server exists in the network.
Which AOS-CX feature should the administrator use to dynamically assign the policy settings to the correct switch ports?
- A. Voice VLANs
- B. Change of authorization
- C. Dynamic segmentation
- D. Device profiles
Answer: C
NEW QUESTION 34
A network administrator is managing a network that deploys a multicast service The administrator has multiple streamssuccessfully being routed by PIM-DM in the network The administrator then adds a new stream with a destination addressof 239.0.0 1. However clients who have not joined the stream are receiving it.What should the administrator do to fix this problem?
- A. Verify that IGMP is enabled between the switches connecting the multicast source and receivers
- B. Define the 239 0 0 1 stream on the rendezvous point (RP).
- C. Define the 239 0 0 1 stream on the PIM candidate bootstrap router
- D. Change the destination multicast address to 239 1.1.1.
Answer: A
NEW QUESTION 35
When implementing deficit weighted round robin queuing, what importance does the weight value have?
- A. Percentage of interface bandwidth
- B. Prioritizing latency-sensitive traffic
- C. Queue priority in processing traffic
- D. Strict priority queue
Answer: C
NEW QUESTION 36
A company has recently upgraded their campus switching infrastructure with AOS-CX switches. They have implemented 802.1X authentication on access ports where laptop and IOT devices typically connect. An administrator has noticed that for POE devices, the AOS-CX switch ports are delivering the maximum wattage to the port instead of what the device actually needs.
Concerned about this waste of electricity, what should the administrator implement to solve this problem?
- A. Enable AAA authentication to exempt LLDP and/or CDP information.
- B. Globally enable the QoS trust setting for LLDP and/or CDP,
- C. Implement a classifier policy with the correct power definitions
- D. Create device profiles with the correct power definitions.
Answer: D
NEW QUESTION 37
......
HPE6-A73 Exam Questions – Valid HPE6-A73 Dumps Pdf: https://www.pass4surequiz.com/HPE6-A73-exam-quiz.html
Verified HPE6-A73 dumps Q&As - Pass Guarantee: https://drive.google.com/open?id=1N48CxMkpEJh2y9DPEhjd-4sXq6PkogqE